Angle Grinder Accessories
Angle Grinder Accessories – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.hu.
Continue
494
Results
Kreator KRT084101, 125mm
Diamond Disc - cutting, suitable for concrete, stone and granite, turbo-segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 12250 rev/min
BOSCH Support plate 2.608.601.169
Backing Pad - for Bosch PEX 270 A and PEX 270 AE eccentric grinders, medium hard, diameter 125 mm, 8 holes, screws included, hexagon wrench and Allen wrench
BOSCH Medium hard backing plate 125 mm 2.608.601.607
Backing Pad - for eccentric grinders, medium hard, with foam pad, diameter 125 mm, 8 holes
BOSCH Laminated grinding wheel X551, Expert for Metal 2.608.607.353
Lamellar Disc - diameter: 125mm, grain: 40, for use on metal
BOSCH Protective dust filter GEN V for small angle grinders 2.608.000.695
Replacement Filter The dust filter for small angle grinders protects against exposure to coarse dust particles. The result is longer tool life. It can be easily attached to the ventilation slots without tools and is easy to clean. The dust filter is designed for use when grinding metal, especially when using fibre ceramic discs. It is compatible with small angle grinders.
BOSCH Straight wrench with two pins 1.607.950.048
Electric Tool Accessory The double-pin wrench is used to clamp all discs for angle grinders and the GGS 6 S Professional straight grinder.
BOSCH Cup Brush Wavy Wire 70 1.608.614.020
Sanding Brush The Clean for Metal wire brush provides a very fine surface finish. The Cup Wire Brush features a crimped wire with a brass finish for less and medium-duty cleaning. It is suitable for removing coatings, rust and paint from medium and large ferrous and non-ferrous surfaces. This disc wire brush is also suitable for roughening, matting and cleaning of formwork boards and tiles. Brass-coated wires protect the brush against corrosion. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. Designed for use in angle grinders.
BOSCH Roughing wheel Expert for Metal A 30 T BF, 180 mm, 6.0 mm 2.608.600.315
Grinding Wheel - diameter: 180mm, suitable for metal
BOSCH Roughing wheel Expert for Inox AS 30 S INOX BF, 115 mm, 6.0 mm 2.608.600.539
Grinding Wheel - diameter: 115mm, suitable for metal
BOSCH Diamond cutting disc Best for Concrete 350 x 20,00+25,40 x 3,2 x 15 mm 2.608.602.658
Diamond Disc - cutting, suitable for concrete, segmented, diameter 350 mm, installation hole 25.4 mm, thickness 3.2 mm, maximum speed 5500 rev/min, X-Lock mounting
BOSCH Diamond cutting disc Standard for Asphalt 350 x 20/25,40 x 3,2 x 10 mm 2.608.602.625
Diamond Disc - cutting, suitable for concrete, segmented, diameter 350 mm, installation hole 25.4 mm, thickness 3.2 mm, maximum speed 5500 rev/min
BOSCH Diamond cutting disc Best for Ceramic 350 x 30/25,40 x 3 x 10 mm 2.608.602.640
Diamond Disc - cutting, suitable for stone, ceramics, marble and tiles, classic, diameter 350 mm, installation hole 30 mm, thickness 3 mm, maximum speed 5500 rev/min
BOSCH Diamond cutting disc Best for Ceramic 250 x 30/25,40 x 2,4 x 10 mm 2.608.602.638
Diamond Disc - cutting, suitable for stone, ceramics, marble and tiles, classic, diameter 250 mm, installation hole 30 mm, thickness 2.4 mm, maximum speed 6150 rev/min
BOSCH Diamond Cutting Wheel Standard for Stone 350 x 20/25,40 x 3,1 x 10 mm 2.608.602.603
Diamond Disc - cutting, suitable for concrete, stone, masonry and granite, segmented, diameter 350 mm, installation hole 25.4 mm, thickness 3.1 mm, maximum speed 5500 rev/min
BOSCH Diamond Cutting Wheel Standard for Stone 300 x 20/25,40 x 3,1 x 10 mm 2.608.602.602
Diamond Disc - cutting, suitable for concrete, stone, masonry and granite, segmented, diameter 300 mm, installation hole 25.4 mm, thickness 3.1 mm, maximum speed 6400 rev/min
BOSCH Diamond cutting disc Standard for Concrete 400 x 20/25,40 x 3,2 x 10 mm 2.608.602.545
Diamond Disc - cutting, suitable for concrete, segmented, diameter 400 mm, installation hole 25.4 mm, thickness 3.2 mm, maximum speed 4800 rev/min
BOSCH Diamond cutting disc Standard for Concrete 230 x 22,23 x 2,3 x 10 mm 2.608.603.243
Diamond Disc - cutting, suitable for concrete, segmented, diameter 230 mm, installation hole 22.23 mm, thickness 2.3 mm, maximum speed 6650 rev/min, 10 pc(s) discs in the pack
BOSCH Diamond Cutting Wheel Standard for Ceramic 125 x 22,23 x 1,6 x 7 mm 2.608.603.232
Diamond Disc - cutting, suitable for stone, ceramics, porcelain and tiles, classic, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min, 10 pc(s) discs in the pack
BOSCH Diamond cutting disc Standard for Concrete 150 x 22,23 x 2 x 10 mm 2.608.603.241
Diamond Disc - cutting, suitable for concrete, segmented, diameter 150 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 10200 rev/min, 10 pc(s) discs in the pack
BOSCH Diamond cutting disc Best for Marble 125 x 22,23 x 2,2 x 3 mm 2.608.602.690
Diamond Disc - cutting, suitable for marble, classic, diameter 125 mm, installation hole 22.23 mm, thickness 2.2 mm, maximum speed 12250 rev/min, X-Lock mounting
In the category Angle Grinder Accessories on Alza.hu, we currently have a total of 493 products, which you can easily buy online and get quickly delivered. See all of your purchases and make orders on our easy-to-use app.
Chcete doručit do České republiky? Jdi na
Příslušenství k úhlovým bruskám
Chcete doručiť tovar na Slovensko? Prezrite si
Príslušenstvo k uhlovým brúskam
Für den Versand nach Deutschland, besuchen Sie bitte
Zubehör für Winkelschleifmaschinen
Für den Versand nach Österreich, besuchen Sie bitte
Zubehör für Winkelschleifmaschinen