Corsair Hydro Series H60 (2018)

The Corsair Hydro Series H60 (2018) is a practical component of a good computer. It will help you to reduce the extremely high operating temperature of the CPU by modifying the airflow in your PC. As this is a water-cooled system with a unique construction, this also guarantees that your PC will look totally different from the rest. A uniquely developed fluid flows through the rigid tubing, which is then cooled in the radiator fitted with one fan. The Corsair Hydro Series H60 (2018) fully replaces an old cooling system that uses up too much power. This new water-cooling version has added the possibility of speed control and features an original backlight. The water-cooling set from Corsair supports AM2, AM2+, AM3, AM3+ and AM4 AMD sockets, and 1150, 1151, 1155, 1156, 1200, 2011 and 2066 Intel sockets. In addition to temperature reduction, the water-cooling system is colourfully backlit.

Corsair Hydro Series H60 (2018) Water Cooler Key Features

• Modern appearance enriched by the White backlight colour
• Water cooling supports sockets from AMD: AM2, AM2+, AM3, AM3+ and AM4
• Water cooling supports sockets from Intel: 1150, 1151, 1155, 1156, 1200, 2011 and 2066
• Fan achieves a speed of 1700 RPM
• Noise resulting from the cooling is limited to 18,3dB
• Dimensions of the cooling system: Width of 157mm ; Height of 27mm and Depth of 120mm

Corsair Water Cooling Customisation

This set which can cool down even busy gaming CPU’s, is built from a fan, good pumps and a high-performing radiator. You can keep the water cooling at a comfortable rate by editing the fan speed. The maximum speed it can be set to is 1700RPM. The White backlight colour gives a great illuminated colour to your PC case.

A New Cooling Method with this

In case you are unsure about selecting a liquid CPU cooler instead of an air cooler, then you should think about the proof. Mostly, a compact water cooler fills up less of the valuable space of a PC than a bulky air cooler. Its installation takes only a few minutes, since it is filled with the liquid coolant, then sealed and can be attached to the CPU and chassis of the computer. Corsair, the manufacturer, took care to ensure that the coolant lasts as long as possible in the reinforced tubing. You don't have to worry about dampness short-circuiting your PC.