SMC WBR14S-N4

The perfect solution for extending an existing home or corporate networks through wireless access point from SMC. This broadband router bearing WBR14S-N4 allows you to take your network to share high-speed cable or xDSL Internet connection. Other computers can connect to the router via one of the four Ethernet ports, RJ-45 supports data rates up to 100 Mbps, or can also be used to connect high-speed Wireless Access Point Wireless-N. The router supports virtually all wireless standards 802.11, among which you will find the powerful, such as 802.11g, but 802.11b. For your own safety data, you can use one of the supported encryption methods, such as WPA, WPA2 or later. You can also configure the network element IP address filtering and MAC address.

Equipment WBR14S-N4 provides a very easy to install and set up as standard through virtually any web browser. There is also support for DNS servers and IGMP proxy, DHCP support, virtual servers, and moreover it is also possible to set up dual SSID. A new model of the wireless access point from SMC operates at 2.4GHz and features an antenna that provides sufficient power, about 17 dB, ensuring a stable and sufficiently strong signal and transfer speeds up to 150 Mb/s. Among the basic functions you will find a built-in firewall, NAT, or the support for static routing.

Technical Specifications:

Ports:
1x WAN 10/100 Mbps
4x LAN 10/100 Mbps
1x 2dBi antenna

Buttons:
WPS button
Reset

LED indicators:
Power
LAN (Ethernet Link/Activity)
WAN (Ethernet Link/Activity)
WLAN (Wireless Link/Activity)
WPS (WPS in progress)

Management Features:
EZ Setup Wizard
Administration via a Web interface (HTTP)
Remote Administration
SNTP time synchronization
UPnP Support
Firmware Upgradeable

Safety:
NAT Firewall with SPI
Intrusion Detection
Access Control
MAC, IP and Port Filter
DMZ Host
Option to turn off SSID broadcast
Wireless MAC address filtering
Support for WEP encryption 64-/128-bit
Support WPA-/WPA2-PSK (Pre-Shared Key, TKIP, AES)
Support WPA/WPA2 Enterprise mode (802.1x)
Support for WiFi Protected Setup (WPS PBC and PIN method)

Router Features:
Connector for high-speed cable/xDSL internet connection
Built-in wireless access point to support a rate of 150 Mb/s
Podpora satatického Routing
Dynamic RIP v1/v2 routing support
NAT support, NAPT
Podpora Wireless Distribution System (WDS)
Provides 802.11 Wi-Fi Multimedia (WMM)
Podpora IGMP Proxy
Support Dual SSID
Support for dynamic DNS
Podpora DNS Proxy
-In Virtual Server
Supports DHCP server

Supported Standards:
Wired: IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX)
Wireless: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

Operating frequency:
FCC: 2412-2462 MHz (Ch1 to Ch11)
ETSI: 2412 to 2472MHz (Ch1 to Ch13)
Japan: 2412 to 2484MHz (Ch1 to Ch14)

TX Output power:
802.11n: 17 +/- 1 dBm
802.11g: 17 +/- 1 dBm
802.11b:20 +/- 1 dBm

Temperature:
Operating: 0 to 40 ° C
Storage: - 20 to 60 ° C

Humidity:
Operating: 10-85%
Storage: 5-90%

Dimensions:
90.8 x 135.5 x 28.5 mm

Weight:
157 g

Power:
Input: 110 or 240 VAC, 50-60 Hz
Output: 5 V/1

Package Contents:
SMCWBR14S-N4
Power Adapter
RJ45 cable
QIG
Documentation on CD