Vivotek MD7560

IP camera designed specifically for use in transport - buses, trains and other vehicles. With full support for standard EN50155 for use in rail vehicles as cover IP67 This IP camera is resistant to shock, vibration, humidity, dust and temperature changes. This ensures reliable recording and video during vehicle movement. Vandal resistant design cover provides effective protection camera against possible attacks by vandals. Due to the combination of high resolution and robust protective cover, this IP camera all the prerequisites for performing the tasks in securing the safety of passengers in transportation and optimal mobile viewing.

Function Tamper Detection makes this IP camera really intelligent and robust device that allows, for example, alert staff in case of blockage or zasprejování housing. Power over Ethernet (PoE 802.3af) offers the possibility of mounting the camera using a single cable. This greatly simplifies installation and reduces costs. Thanks to the built-in Micro SDHC card slot allows you to perform local video recording. IP Camera VIVOTEK MD7560 also offers a wide range of advanced features, including QoS to optimize data transfers. Finally, please software for up to 32 cameras free.

Specifications:

Design:
Outdoor (IP67)
Vandal resistant design

Image capture:
Sensor: 1/3, 2 "CMOS
Resolution: 1600 x 1200 pixels (up to 15 frames/s)
Sensitivity in day mode: 0.6 Lux
Parameters Shutter: 1/5 ~ 1/40000 s, AGC, AWB, AES, BLC
Video compression: MJPEG, MPEG-4, Multistreaming

Lens:
f = 2.8 mm
Horizontal angle: 98 °
Vertical angle: 73 °

Special Features:
Micro SD/SDHC slot
Mechanical adjustment tilt angle 0 ° ~ 90 °
Access from mobile phones
Crop video to save the transferred data
ePTZ
Adaptive streaming for dynamic frame rate control
Tamper Detection
Privacy Masking
Certification for railway vehicles (standard EN50155)

Sound:
Input for external microphone
Audio Compression: GSM-AMR 4.75 kbps ~ 12.2 kbps MPEG-4 AAC 16 kbps ~ 128 kbps, 64 kbps G.711

Network protocols:
IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X

Consumption:
about 7.5 W
PoE 802.3af

Interface:
1x alarm input for connecting external devices (such as PIR sensor, door contact)
1x RJ-45 (10/100 Mbps)

Dimensions:
107 x 47 x 130 mm

Weight:
about 450 g

Operating temperature:
-25 ° to 50 ° C

Packing:
IP Camera MD7560
Self-adhesive template for easier installation
RJ-45 connector
Screwdriver
Desiccant bag
Quick Installation Guide
Software CD
Warranty certificate