FIBARO Roller Shutter Module 3

Key features of the Fibaro Roller Shutter 3 module

• Small dimensions
• For controlling motorized blinds, shutters, awnings and gates
• It measures electricity consumption
• Advanced calibration technology
• Automatic software update
• Possibility of mounting directly into the installation box
• Can be synchronized with the alarm system

Advanced wireless module calibration

Advanced calibration technology modulu zajišťuje, že zařízení bude vždy přesně detekovat polohu a stav rolet či vrat. A well-performed calibration prevents poor detection of the open / close state. You will even be able to find out the exact opening / closing angle of the blinds through the mobile application. Roller Shutter 3 supports up to 5 different modes that allow you to precisely adjust exactly to your needs.

Additional information:

Power supply:
100–240 V ~ 50/60 Hz

Rated load current:
4.2 A for luminaires and resistive loads, 1.7 A for motors with compensated power factor (inductive load)

Supported engine types:
single-phase AC motors

Stop mechanisms:
electronic and mechanical

Consumption:
up to 0.8 W

Operating temperature:
0-35 ° C

Active element:
microrelay switch µ

For installation in el. boxes:
O = 50 mm, depth? 60 mm

Radio protocol:
Z-Wave (500 series chips)

Radio signal:
up to 5 dBm

Frequency band:
868.4 MHz

Range:
up to 50 m outside
up to 40 m inside

External dimensions:
42.5 × 38.25 × 20.3 mm