Gembird
We can deliver Gembird products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
59
Results
1,090 Ft
In stock > 20 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
MH415e
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 40°C, recommended print speed: from 40mm/s to 60mm/s
11,490 Ft
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF5334h
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
7,090 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532o5
Filament - made from ABS soluble and fluorescent, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
6,490 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF531d3
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
6,090 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF531d
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
7,090 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532o3
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA carbon, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,8kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Surge Protector - 1,5m, male connectors: 1× type F fork, female connectors: 5× fork Type E, shock power capacity: 250 J, maximum current load: 16 A, peak current: 9000 A, LED indication up to 16 A
Headphones - with microphone, headset, ear, closed construction, 3,5mm Jack, with volume control, frequency range: 20 Hz-20000 Hz, sensitivity: 103 dB/mW, impedance: 32 Ohm, cord length of 1,8m
Mouse Pad - material: textile, wrist rest, gel pad, size: 24 × 0,4 × 22cm, black colour
Bluetooth Adapter - external, USB 2.0 connection, transfer speed: 24Mb/s, range: 50m
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Power Cable connecting, 0,15m, male connectors: 1× SATA (Serial ATA), female connectors 2× SATA (Serial ATA)
Filament - made from ABS soluble and metallic, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble and fluorescent, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s