Harman Kardon SB 10/230
Don't like the alternatives? Choose from the full product list
Harman Kardon SB 10/230
Discontinued
Harman Kardon SB 10/230
Set Home Theatre Harman Kardon SB 10 attracted mainly to design and order milovné user.Instead, many speakers and wires provides an elegant solution 3kanálovým soundbar that contains the center and front satellite speakers.It is complemented by an active subwoofer with a high output of 200 W.Soundbar can be attached to the wall using the supplied brackets.Likewise, you can lay directly below the TV, if you have a TV lying on the table.
For the ultimate surround experience you just buy a suitable multi-channel receiver, and possibly the rear effect speakers (egHKTS 30SAT) to build a full fifthA solution.Subwoofer does not turn, has had a circuit that will automatically switch from stand-by mode when they adopt sound.With customizable subwoofer can easily customize the output to best suit you.Set the power balance can soundbar/subwoofer, as well as the phase of subwoofer or bass intensity.Subwoofer is also equipped with a special LFE (low frequency effects) input, which simplifies connection to the receivers and preamplifiers/processors with dedicated subwoofer outputs that transmit low frequency signals.The package is in addition to wall mounts and all necessary cabling.
Specifications:
System:
Frequency range (-6dB):45 to 20 000 Hz
Soundbar Speaker System:
Number of channels:3
2 Central-woofer (satellite):76 mm with a paper cone, shielded
2 Central-woofer (center):76 mm with a paper cone, shielded
2x tweeter (satellite):19 mm silk dome, shielded
1x tweeter (center):19 mm silk dome, shielded
Soundbar features:
The recommended maximum amplifier power for satellites:60 W (per channel)
The recommended maximum power amplifier for center speaker:100 W
Sensitivity:84 db
Impedance:8 ohm
Crossover frequency:2200 Hz
Enclosure Type:closed
Connections:terminal connectors
Finish:glossy black
Dimensions:110 x 920 x 89 mm (H x W x H)
Weight:3.67 kg
Subwoofer:
The drive:200 mm (8 ") woofer
Amplifier:200 W RMS
Volume control, phase, Bass Boost
Enclosure Type:closed
Power:AC 220-240 V, 50Hz-60Hz
Consumption:200 W max<1 W standby
Finish:glossy black
Dimensions:353 x 267 x 267 mm (H x W x H)
Weight:9 kg
For the ultimate surround experience you just buy a suitable multi-channel receiver, and possibly the rear effect speakers (egHKTS 30SAT) to build a full fifthA solution.Subwoofer does not turn, has had a circuit that will automatically switch from stand-by mode when they adopt sound.With customizable subwoofer can easily customize the output to best suit you.Set the power balance can soundbar/subwoofer, as well as the phase of subwoofer or bass intensity.Subwoofer is also equipped with a special LFE (low frequency effects) input, which simplifies connection to the receivers and preamplifiers/processors with dedicated subwoofer outputs that transmit low frequency signals.The package is in addition to wall mounts and all necessary cabling.
Specifications:
System:
Frequency range (-6dB):45 to 20 000 Hz
Soundbar Speaker System:
Number of channels:3
2 Central-woofer (satellite):76 mm with a paper cone, shielded
2 Central-woofer (center):76 mm with a paper cone, shielded
2x tweeter (satellite):19 mm silk dome, shielded
1x tweeter (center):19 mm silk dome, shielded
Soundbar features:
The recommended maximum amplifier power for satellites:60 W (per channel)
The recommended maximum power amplifier for center speaker:100 W
Sensitivity:84 db
Impedance:8 ohm
Crossover frequency:2200 Hz
Enclosure Type:closed
Connections:terminal connectors
Finish:glossy black
Dimensions:110 x 920 x 89 mm (H x W x H)
Weight:3.67 kg
Subwoofer:
The drive:200 mm (8 ") woofer
Amplifier:200 W RMS
Volume control, phase, Bass Boost
Enclosure Type:closed
Power:AC 220-240 V, 50Hz-60Hz
Consumption:200 W max<1 W standby
Finish:glossy black
Dimensions:353 x 267 x 267 mm (H x W x H)
Weight:9 kg
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
