Archive - Sander Accessories
Choose an alternative in the category
Sander Accessories
1,169
Results
Discontinued
Order Code:
BOCh6073
Discontinued
Order Code:
BOCh6072
Discontinued
Order Code:
BOCh6064
Discontinued
Order Code:
BOCh6069
Discontinued
Order Code:
BOCh6065
Attachment It is compatible with all Bosch angle grinders in combination with the additional handle. The hand guard protects the hands when using the rubber adapter pads.
Discontinued
Order Code:
BOCh6006
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5970
Attachment It is compatible with all Bosch angle grinders and dust guide sleds with a 35 mm radius. Replacement dust outlet elbow for guide sledge.
Discontinued
Order Code:
BOCh6005
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5969
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5971
Discontinued
Order Code:
BOCh5950
Electric Tool Accessory The wrench is used for tightening and loosening 14mm locknuts. It is compatible with the GGS 16 Professional straight grinder.
Discontinued
Order Code:
BOCh5948
Cup Brush The Clean for Metal wire brush provides a very fine surface finish. The cup brush is equipped with a crimped wire for less and medium-duty cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. for removing coatings and rust and for cleaning formwork boards and tiles. The pot brush is also suitable for roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5922
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5921
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5920
Cup Brush The Heavy for Metal wire brush provides a very coarse surface finish. This pot brush features a braided wire for powerful cleaning. Ideal for metal, suitable for cleaning medium and large steel surfaces, e.g. removal of rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It is designed for use with angle grinders with M14 thread.
Discontinued
Order Code:
BOCh5919
Discontinued
Order Code:
BOCh5883
Discontinued
Order Code:
BOCh5876
Discontinued
Order Code:
BOCh5879
Sanding Pad - Suitable for Bosch vibratory grinders, rectangular plate shape, Velcro fastening of abrasive, dimensions 183 × 93 mm (W × D)
Discontinued
Order Code:
BOCh5878
Discontinued
Order Code:
BOCh5874
Discontinued
Order Code:
BOCh5887
Discontinued
Order Code:
BOCh5889
Discontinued
Order Code:
BOCh5888