Construction Site
Construction Site – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.hu.
Continue
5,774
Results
Carving Chisel carver and carpentry, the production material is chrome-vanadium steel, the production material is rubber, length of the chisel is 260 mm, width 25
Carving Chisel carver and carpentry, the production material is chrome-vanadium steel, the production material is rubber, length of the chisel is 260 mm, width 19
Carving Chisel carver and carpentry, the production material is chrome-vanadium steel, the production material is rubber, length of the chisel is 260 mm, width 12
File - round, for metal, ergonomic, soft-grip, non-slip handle, handle material: plastic, length 20 cm, hmotnost 100 g
Penetration - strengthens and reduces water absorption, increases the adhesion of subsequent coats, clear when dry, without solvents, vapour permeable, usable indoors and outdoors, surface dry in about 2 hours, additional layers possible after 15 minutes, volume 5 l - 1,100 Ft/1 l
Penetration - strengthens and reduces water absorption, increases the adhesion of subsequent coats, clear when dry, without solvents, vapour permeable, usable indoors and outdoors, surface dry in about 2 hours, additional layers possible after 15 minutes, volume 10 l - 1,420 Ft/1 l
Sheet Metal Scissors aku, number of strokes per minute is 1600
Sheet Metal Scissors aku, number of strokes per minute is 1600
SDS-Plus Rotary Hammer Drill - with pneumatic hammering, chuck SDS Plus, 950 rev/min rated speed, 4600 impact rate per minute, impact energy 2,6 J, weight 5,65 kg
Paint Spray System cordless, volume of 0,9 l, number of accumulators in pack - without battery
Angle Grinder - power input 1600 W, disc diameter 150 mm, max. speed 8500 rev/min, additional handle, weight 3.4 kg
Angle Grinder - power input 750 W, disc diameter 115 mm, max. speed 11000 rev/min, additional handle and antivibration handle, weight 1.8 kg
Angle Grinder - power input 1550 W, disc diameter 125 mm, max. speed 9500 rev/min, speed control, additional handle and antivibration handle, width 5.8 cm, weight 2.5 kg
Power Sander - electric, power input 220 W, 13000 OPM, delta sanding pad, velcro paper fastening, sanding surface dimensions 149 × 105 mm (L×W), exterior suction, weight 1.1 kg, dust bag included
Power Sander - electric, power input 125 W, delta sanding pad, velcro paper fastening, sanding surface dimensions 140 × 97 mm (L×W), exterior suction, weight 1 kg
Drill Driver - battery SHARE20V Li-ion, speed I. 0-500/min, II. 0-1800/min, number of impacts I. 0-8800/min, II. 0-28500/min, L/P course, yes, quick-release head all-metal 1/2", drill diameter 0,5-10 mm, degrees of utah. torque 20 + drilling, screwdriving, hammer drilling, max. torque 50/33 Nm, max. drilling into wood 25 mm, max. drilling into steel 6 mm, max. drilling into masonry 8 mm, Length 15 cm, weight with battery 1.3 kg, 50 Nm brushless motor, all-metal chuck with locking, Continuous torque adjustment plus drilling, Screwing, tap, all-metal gearbox, LED flashlight with range, Drilling with impact drilling can also handle harder materials and masonry, for universal batteries SHARE20V
Drill Driver - battery SHARE20V Li-ion, battery capacity 2Ah, speed I. 0-500/min, II. 0-1800/min, number of impacts I. 0-8800/min, II. 0-28500/min, L/P course, yes, quick-release head all-metal 1/2", drill diameter 0,5-10 mm, degrees of utah. torque 20 + drilling, screwdriving, hammer drilling, max. torque 50/33 Nm, max. drilling into wood 25 mm, max. drilling into steel 6 mm, max. drilling into masonry 8 mm, Length 15 cm, battery charging approx. 50 min, accessory case with 6 drill bits, 6 tines and bit holder, in the trunk, weight with battery 1.3 kg, 50 Nm brushless motor, all-metal chuck with locking, Continuous torque adjustment plus drilling, Screwing, tap, all-metal gearbox, LED flashlight with range, Drilling with impact drilling can also handle harder materials and masonry, for universal batteries SHARE20V
Drill Driver - battery SHARE20V Li-ion, battery capacity 2Ah, speed I. 0-500/min, II. 0-1800/min, number of impacts I. 0-8800/min, II. 0-28500/min, L/P course, yes, quick-release head all-metal 1/2", drill diameter 0,5-10 mm, degrees of utah. torque 20 + drilling, screwdriving, hammer drilling, max. torque 50/33 Nm, max. drilling into wood 25 mm, max. drilling into steel 6 mm, max. drilling into masonry 8 mm, Length 15 cm, battery charging approx. 50 min, in the trunk, yes, weight with battery 1.3 kg, 50 Nm brushless motor, all-metal chuck with locking, Continuous torque adjustment plus drilling, Screwing, tap, all-metal gearbox, LED flashlight with range, Drilling with impact drilling can also handle harder materials and masonry, for universal batteries SHARE20V
Impact Wrench aku, mounting type: hexagon socket 1/4", 3600 rev/min, 230 Nm torque
Impact Wrench aku, mounting type: hexagon socket 1/4", 3600 rev/min, 230 Nm torque
Construction Site
Alza Days
Connectors
Construction Chemicals
Mixers
Solar Power
Tarps
Workwear
Cordless Power Tools
Hand Tools
Measuring Devices
Work Tools
Cutters
Ladders
Sawhorses
Handling Equipment
Storage
Ties & Straps
Packaging Materials
Door Frame Spacers
Supports
Work Lights
Respirators and Shields
No longer sold
Construction Site
In the category Construction Site on Alza.hu, we currently have a total of 5773 products, which you can easily buy online and get quickly delivered. See all of your purchases and make orders on our easy-to-use app.
Chcete doručit do České republiky? Jdi na
Vybavení na stavbu
Chcete doručiť tovar na Slovensko? Prezrite si
Vybavenie na stavbu
Für den Versand nach Deutschland, besuchen Sie bitte
Bauwerkzeuge und Bauzubehör
Für den Versand nach Österreich, besuchen Sie bitte
Bauwerkzeuge und Bauzubehör