Most expensive angle Grinder Accessories
This page includes the most expensive angle Grinder Accessories, or more specifically all products from the category angle Grinder Accessories sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
495
Results
WOLFCRAFT Wire brush disc 22mm 2148000
Sanding Brush - disc, to remove rust, cleaning, on metal, sheet metal, wood and stone, material steel, braided wire, brush diameter 115 mm
7,090 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
PHTKa083
BOSCH Diamond disc segment BPE, 125 x 22,23 mm 2.608.602.197
Diamond Disc - cutting, suitable for concrete, stone and tiles, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min
6,990 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ZDnar2269
DREMEL SpeedClic Metal Cutting Wheel, 12 pcs 2.615.S45.6JD
Cutting Disc - 38mm diameter, 0.75mm thickness, suitable for aluminium, metal, steel
Yato Diamond Disc 230 x 22.2 x 2.7mm
Diamond Disc - cutting, suitable for concrete, stone, masonry and tiles, diameter 230 mm, installation hole 22.2 mm, thickness 2.7 mm, maximum speed 6500 rev/min
6,890 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CMP1171
DREMEL 20-Piece Wood Accessory Set 2.615.C68.1JA
Accessory Kit - suitable for wood, compatible with all Dremel universal accessories, 20-piece starter set of accessories for engraving, sanding and drilling, 3× high-speed cutter, 1× sanding band and mandrel 13mm (grit 60), 4× sanding band 13mm (grit 60 and 120), 10× sanding disc, 1× drill bit, 1× mandrel, stored in a case
YATO Rotary Angle Ratchet Rough 115 mm type 1
Grinding Wheel - diameter: 115mm, suitable for wood and plastic
FERRIDA protective cover for AG 1280
Exhaust hood - protective cover for angle grinder FERRIDA AG 1280
BOSCH Cup Brush Wavy Wire 70 1.608.614.020
Sanding Brush The Clean for Metal wire brush provides a very fine surface finish. The Cup Wire Brush features a crimped wire with a brass finish for less and medium-duty cleaning. It is suitable for removing coatings, rust and paint from medium and large ferrous and non-ferrous surfaces. This disc wire brush is also suitable for roughening, matting and cleaning of formwork boards and tiles. Brass-coated wires protect the brush against corrosion. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. Designed for use in angle grinders.
BOSCH Universal 180x22.23x2.2x7mm
Diamond Disc - cutting, suitable for concrete and brick, segmented, diameter 180 mm, installation hole 22.23 mm, thickness 2.2 mm, maximum speed 8500 rev/min
Kreator KRT084101, 125mm
Diamond Disc - cutting, suitable for concrete, stone and granite, turbo-segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 12250 rev/min
TOTAL-TOOLS Diamond Grinding Wheel, 125mm
Grinding Wheel - diameter: 125mm, suitable for concrete and wood
BOSCH X-LOCK Diamond Cutting Disc Standard for Universal
Diamond Disc - cutting, suitable for concrete, stone, ceramics, metal, marble and masonry, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 12250 rev/min, X-Lock mounting
6,090 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFA1a38
BOSCH Standard Diamond Disc for Stone 115x22.23x1.6x10mm
Diamond Disc - cutting, suitable for concrete, stone and granite, segmented, diameter 115 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 13300 rev/min
BOSCH Support plate Standard M14 125 mm 1.608.601.033
Backing Pad - for angle grinders, standard, diameter 125 mm, flange thread M14, max. 12,250 rpm. /min
BOSCH Protective dust filter GEN V for small angle grinders 2.608.000.695
Replacement Filter The dust filter for small angle grinders protects against exposure to coarse dust particles. The result is longer tool life. It can be easily attached to the ventilation slots without tools and is easy to clean. The dust filter is designed for use when grinding metal, especially when using fibre ceramic discs. It is compatible with small angle grinders.
BOSCH EXPERT 7-piece basic set M480 for eccentric grinders, 150 mm 2.608.901.203
Grinding Wheel - diameter: 150mm, suitable for wood and drywall
BOSCH Cleaning wheel N377, Best for Metal 125 mm, 22,23 mm, SiC 2.608.607.633
Grinding Wheel - diameter: 125mm, suitable for concrete, brick, wood, metal and masonry
BOSCH Grinding wheel EXPERT R781 Prisma Ceramic X-LOCK, 125 mm, 22,23 mm, P60, 5 pcs 2.608.621.783
Grinding Wheel - diameter: 125mm, suitable for metal and steel
BOSCH X-LOCK Diamond Cutting Disc Standard for Ceramic System
Diamond Disc - cutting, suitable for ceramics, classic, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min, X-Lock mounting
BOSCH Support plate Standard M14 115 mm 2.608.601.005
Backing Pad - for angle grinders, soft, diameter 115 mm, flange thread M14, max. 13,300 rpm. /min
Chcete doručit do České republiky? Jdi na
Příslušenství k úhlovým bruskám
Chcete doručiť tovar na Slovensko? Prezrite si
Príslušenstvo k uhlovým brúskam
Für den Versand nach Deutschland, besuchen Sie bitte
Zubehör für Winkelschleifmaschinen
Für den Versand nach Österreich, besuchen Sie bitte
Zubehör für Winkelschleifmaschinen