Archive - Workshop Equipment
Choose an alternative in the category
Workshop Equipment
2,173
Results
Discontinued
Order Code:
MTG072
Caliper - measuring range: 0-150mm, measuring accuracy: 0.02mm
Discontinued
Order Code:
AUPR4563
Caliper measurement range: 0-25mm, measuring accuracy: 0.001mm
Discontinued
Order Code:
AUPR4562
Holder - For retrieving metal objects from tight and inaccessible spaces, length 193 - 760mm, magnetic end with load capacity 2kg
Discontinued
Order Code:
AUPR15953
Screwdriver - screwdriver with bits, screwdriver body is ergonomically rubberised, tightening clamping mechanism, the most commonly used flat, cross, alloy and Torx bits
Discontinued
Order Code:
AUPRA4642
Screwdriver - ergonomically shaped, ratchet screwdriver with smooth 72-point gear, ergonomically rubberised handle, the most commonly used flat bits, cross, Torx, extension, reduction and 9x hexagonal extension
Discontinued
Order Code:
AUPRA4643
Reel - manual, maximum load 450kg, vertical thrust, rope length 7,3 m, placement: floor and for walls
Discontinued
Order Code:
PROT0034
Discontinued
Order Code:
PHT0014
Discontinued
Order Code:
PHT0013
Hoist - A 2t lever hoist, pulling force of 4000kg, has 3 wrought hooks with safety fuses and a steel rope with a diameter of 6mm and a length of 3m
Discontinued
Order Code:
PROT0021
Hoist - The 2t rescue lever hoist, the pulling force is 2000kg, it has 3 forged hooks with safety fuses and steel rope with a diameter of 5mm and a length of 1.7m
Discontinued
Order Code:
PROT0020
Screwdriver Set - electric, 7-piece, includes flat screwdriver 2.5x80mm, 4x100mm, 5.5x125mm, 6.5x150mm, PZ1x80mm cross screwdriver, PZ2x100mm and flat-tip tester 3x65mm
Discontinued
Order Code:
PROT0017
Screwdriver Set - PL + PZ 6-piece, includes flat screwdriver 0.6x3.5/75mm, 1.0x5.5/100mm, 1.2x6.5/150mm and cross head screwdriver 0-75mm, 1-75mm, 2-100mm
Discontinued
Order Code:
PROT0016
Screwdriver Set - PL + PH 6-piece, includes flat screwdriver: 0.6 x 3.5/75mm, 1.0 x 5.5/100mm, 1.2 x 6.5/150mm and crosshead screwdriver: 0-75mm, 1-75mm, 2-100mm
Discontinued
Order Code:
PROT0015
Screwdriver Set - plus sixty-piece bits in the case, includes screwdrivers, bit holders, bits 1/4", bits 5/32"
Discontinued
Order Code:
PROT0014
Discontinued
Order Code:
PROT0009
Discontinued
Order Code:
PROT0008
Cutting Pliers - splitting side two-sided 180mm, recessed pin
Discontinued
Order Code:
PROT0002
Cutting Pliers - side splitting pliers, double-dip plastic, 160mm, flush cutting edge
Discontinued
Order Code:
PROT0001
Hook - large 9cm, packed 5pcs, suitable for MARS workshop and wall panels, blister pack, load capacity: 3kg
Discontinued
Order Code:
PHT0038
Reel - electric, maximum load 800kg, input power 1350W, vertical thrust, rope length 12 m, suspension, separate control
Discontinued
Order Code:
PROT0048
Reel - electric, maximum load 500kg, input power 930W, vertical thrust, rope length 12 m, placement: ceiling-mounted, separate control
Discontinued
Order Code:
PROT0047
Reel - electric, maximum load 250kg, input power 530W, vertical thrust, rope length 12 m, placement: ceiling-mounted, separate control
Discontinued
Order Code:
PROT0046
Wrench Set combination with the size of 10 mm, 12 mm, 13 mm, 14 mm, 17 mm, 19 mm and 8 mm (metric thread), combination, reversible and ratchet, CrV steel, key sizes are 8 mm and 10 mm, set includes 7 piece(s), includes keys from 8 mm up to 19 mm, double-sided keys
Discontinued
Order Code:
PROT0038
