Landu
We can deliver Landu products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
33
Results
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 250°C, recommended print speed: from 50mm/s to 100mm/s
3,990 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250744
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
5,790 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250725
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
5,440 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250712
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 250°C, recommended print speed: from 50mm/s to 100mm/s
3,990 Ft
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250745
3D Printer Accessory - quick heat-up, hot air circulation, 6 preset modes for PLA / PETG / ABS / TPU / PA / PC, overheat protection, for two filaments of 1 kg
20,310 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250752
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
4,590 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250704
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
4,590 Ft
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250705
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
5,790 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250727
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 100mm/s
5,790 Ft
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250718
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 100mm/s
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
6,300 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250730
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -12 %
5,090 Ft
5,790 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250729
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
5,440 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250709
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
5,440 Ft
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250713
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 100mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
4,590 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250701
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
5,440 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250710
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 50mm/s to 100mm/s
4,590 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250706
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
3D Printer Accessory - quick heat-up, hot air circulation, 6 preset modes for PLA / PETG / ABS / TPU / PA / PC, overheat protection, for filament weighing 1 kg
13,640 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250751
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
6,300 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250731
Landu
reviewMotorola Moto Sound Flow (TESZT): stílusos hordozható hangszóró 30 W-os teljesítménnyel és 6000 mAh-s akkumulátorral. Vajon a hangzásával is meg tud lepni?
A Motorola Moto Sound Flow elsőre a textillel bevont dizájnjával hívja fel magára a figyelmet, kézben tartva pedig kellemesen kompakt méreteivel. De vajon hogyan teljesít ott, ahol igazán számít – vagyis zenehallgatás közben? A tesztben megnézem a kialakítást, a...
WhatsAppA WhatsApp többé már nem lesz ingyenes: a Meta előfizetési modellt tervez bevezetni és új köntösbe bújtatja
A WhatsApp, amely hosszú évekig az egyszerű és ingyenes kommunikáció szimbóluma volt, változásokra készül. A Meta új előfizetési modelleket tesztel, modernizálja az alkalmazás megjelenését és fontolgatja a hirdetések bevezetését a szolgáltatás egyes részein. Pontosan mi...
noveltyA Poco X8 Pro és a Poco X8 Pro Max kétféle módot kínál arra, hogyan kombinálhatjuk a hosszú üzemidőt és a nagy teljesítményt
A Poco X8 Pro és a Poco X8 Pro Max első pillantásra csak a méreteikben különböznek, valójában azonban teljesen más felhasználókat céloznak meg. Az alapmodell a teljesítmény, a kijelző és az ár kiegyensúlyozott arányára épít, míg a Max verzió főként az óriási...
NewsSamsung Galaxy M17e 5G (BEMUTATÓ): egy alsó kategóriás okostelefon 6,7 hüvelykes kijelzővel és 6 000 mAh kapacitású akkumulátorral
A Samsung Galaxy M17e 5G a kevésbé igényes felhasználókat célozza meg, akik elsősorban a hosszú üzemidőt és a nagy kijelzőt értékelik. 6,7 hüvelykes, 120 Hz-es kijelzőt, Dimensity 6300 chipet és 6 000 mAh kapacitású akkumulátort kínál. Nem hiányozhat az 50 Mpx-es fő...
noveltyVivo X300 FE (BEMUTATÓ): egy nagy teljesítményű processzorral, kompakt készülékházzal és ambiciózus felszereltséggel rendelkező okostelefon csendes bemutatója
A Vivo nagy felhajtás nélkül mutatta be az új X300 FE modellt, amely egyelőre csak az orosz piacon érhető el. A telefon a kompakt méreteivel, a nagy teljesítményű Snapdragon 8 Gen 5 processzorral és a 6500 mAh-s akkumulátorral tűnik ki. Nem hiányzik belőle az akár 4500...
noveltyHonor Pad X9a (TESZT): megfizethető tablet vékony házzal, Snapdragon 685-tel, 120 Hz-es kijelzővel és korrekt akkumulátorral
A Honor Pad X9a érdekes bónuszként jelenik meg az Honor Magic8 szériájú telefonok mellé – és egyáltalán nem csak „töltelékként”. Nagy, 11,5 hüvelykes, 120 Hz-es kijelzőt, vékony fémházat és olyan üzemidőt kínál, amely gond nélkül kibír egy átlagos napot. Papíron egy...