This page includes the most expensive 3D Printer Filament Spectrum, or more specifically all products from the category 3D Printer Filament Spectrum sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Filament Spectrum ASA 275 1.75mm Polar White 2kg, which costs 28,480 Ft incl. VAT. Check it out, you may like it. Or you’ll get inspired.
379
Results
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,5kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,5kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,280 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632e
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
6,260 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632x
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,190 Ft
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632j
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,190 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632d
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
6,120 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633h
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,120 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632f
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,120 Ft
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632c
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,120 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632p
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,110 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632g
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
6,090 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632n
Filament - made from PC (Polycarbonate), filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 290°C, print mat temperature: 130°C, recommended print speed: from 30mm/s to 200mm/s
Filament - made from PC (Polycarbonate), filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 290°C, print mat temperature: 130°C, recommended print speed: from 30mm/s to 200mm/s
5,960 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s9b
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
5,890 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632m
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
5,890 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF631c
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
5,790 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633k
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
5,790 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632i
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
5,790 Ft
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633a
Chcete doručit do České republiky? Jdi na
Filamenty pro 3D tiskárny
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente