EMP-Centauri Multiswitch P142UP

Toggle Switch - active, 5x input, 4x output
Code:  JT091f Producer's Website:

EMP-Centauri Multiswitch P142UP

Active multi-switch with a source. Has 5 inputs and 4 outputs. Distributes satellite signals from a satellite position (4 polarization) for 4 participants. Multi-switch is controlled by commands from the receiver analog (10-14.5/15.5-20 V, 22 kHz, OFF/ON). Switching between active and passive modes of ground band is using ground attenuator (passive - attenuator in the extreme left position). Quad compatibility (12/18 VDC, 0/22 kHz converter) is provided automatically. Power supply 12V DC ground preamplifier is electronically fused, 100 mA max

Specifications:

LNB input:
950 - 2300MHz

Terresterial input (antenna):
5-862MHz (passive)
40-862MHz (active)

Outputs:
5-2300MHz (passive)
1940-2300MHz (active)

Inbound Loss:
Satellite: 3dB average
Terr. Active: 2dB
Terr. Passive:19db

Consumption:
40 mA (each receiver)
Internal Power: 4W (passive), 6 watts (active) + LNB

Dimensions:
265x152x87mm
(Cable length: 130cm)

Operating temperature:
-30°C to +70°C

Read more

Specifications

Type
Splitter

Type

Type
Splitter
Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for EMP-Centauri Multiswitch P142UP