myPhone Hammer Iron 4 silver

The notification LED is a small light that simplifies the overview of new notifications (message, missed call, notifications from applications). It is most often located above the display, but in some cases the manufacturer also chooses another option, such as the location in the power button on the side of the phone. The LED can be of the RGB type, which allows you to distinguish individual statuses or applications with the appropriate color. Some mobile phones offer the possibility of self-personalization.

Fast charging is a technology that allows you to charge your phone more efficiently. Whereas previously the smartphone needed three hours to charge 100%, today less than half the time for the same battery size is just enough.

A mobile phone is considered shockproof if its design can withstand higher mechanical stress. Its manufacturer usually states from which height the phone can fall without damage, but detailed conditions of impact resistance of individual models may differ.

A mobile phone is water resistant if it meets a certified level of durability that allows total immersion. When it comes to mobile phones, it is the specification of the IP67, IP68, or IP69 Ingress Protection rating.

IP69 indicates the degree of protection of a device that can withstand even high-pressure water (e.g. from a pressure washer) and is also dustproof.

IPS, or In-Plane Switching, often also known as Super TFT, is a type of LCD display technology. It offers an excellent quality-price ratio, natural colours, low power consumption, and wide viewing angles up to almost 180 degrees.

The wide-angle lens allows the device to take photos at a wider angle than the phone' s primary lens. Therefore you will be able to fit such things into picture, for which you would normally need to take a few steps back and that is not always possible, for example indoors.

It software-wise compensates for shakes during video recording, thereby helping to achieve smoother and less shaky footage. The image is stabilized by digitally shifting its crop.

Micro SD cards are used for storing data on mobile phones, GPS navigation and other portable devices.

A-GPS is a sophisticated GPS protocol that helps you quickly locate your mobile device.

Bluetooth is the communication tool used by a huge amount of electronics. Learn how the frequency signal is generated and how it's used. In a simple overview of the different versions, we will show how Bluetooth has evolved and been refined. You can also learn something about the specifications and security of this communication standard.

A device that receives a GPS signal to determine and record a location. GPS modules can be found in car and motorcycle navigation systems, cyclocomputers, sporttesters and GPS locators.

NFC (Near Field Communication) is a wireless communication used to establish a connection between portable devices, over a very short distance, only up to 4cm. Previously, NFC was used to transfer photos and videos, but you'll often hear about it in connection with contactless payments.

LTE (Long Term Evolution) marks the next generation of mobile data networks. This is an intermediate step between 3G and 4G. Although manufacturers and operators sometimes mistakenly refer to it as 4G, it is not a full 4G network. That's for LTE Advanced. The maximum theoretical data transfer rate is up to 175Mbps for download and up to 57.6Mbps for sending data in one frequency band. 

NanoSIM is the smallest, most advanced type of SIM card.

NanoSIM is the smallest, most advanced type of SIM card.

A legújabb USB-csatlakozó a Type-C jelölést viseli. Az előzőektől eltérő alakjának köszönhetően mindkét oldalról be lehet dugni, azonban ez a USB 2.0 és USB 3.0 / 3.1 portokkal való visszafelé kompatibilitás rovására megy. Az adatátviteli sebesség eléri a 10 Gbit/s-ot.

The motion of a gyroscope rotates in space on all three axes. In this case, it determines the direction in which you are moving your phone.

An ambient light sensor that monitors the ambient light levels and dynamically adjusts the display backlight intensity. A practical and handy feature, it is part of most modern phones. It turns the display brightness to the maximum in bright sunlight and dims the backlight in the dark. This makes the phone’s display perfectly readable in all lighting conditions without straining your eyes.

Accelerometers and G-Sensors are motion sensors that determine the tilt in space. The phone uses it to know which way it is being held, e.g. portrait, landscape or upside down.

The vast majority of modern mobile phones are equipped with a proximity sensor. Its task is to evaluate the distance of an object from the sensor. Once the object gets close, the telephone activates a particular function. One of the most common is the function to turn off the screen and the touch layer when the user dials a phone number and places the phone close to his ear.

Az Android a Google által kifejlesztett operációs rendszer, amelyet jelenleg a legtöbb mobiltelefon-gyártó használ. Ez egy nyílt operációs rendszer, amely gyakorlatilag korlátlan testreszabási lehetőségekkel rendelkezik. Egyes módosítások az alapbeállítások segítségével végezhetők el, míg más módosítások bármikor letölthetők a Google Play áruházból. A felhasználó így nagyon könnyen módosíthatja nemcsak a grafikus felületet, hanem a telefon kezelésének módját is. Az Android gyenge pontja a rosszindulatú támadásokra való nagyobb fogékonyság. Az egyes operációs rendszerek részletesebb leírása, előnyeik és hátrányaik a Mobil operációs rendszerek összehasonlítása című cikkben található.

Pure Android is an operating system for mobile phones with Android in its simplest form - it does not include an adjusted graphical interface or any features that are added to the operating system expansion by the individual manufacturers.