PLASTY MLADEČ
We can deliver PLASTY MLADEČ products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
89
Results
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA fluorescent, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,5kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.01mm, weight: 0,5kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 20mm/s
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,75kg, print temperature: up to 260°C, print mat temperature: 110°C
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 40mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
3D Printer Accessory Ideal for materials: PC/ABS, ABS-T, ABS. MAGIGOO is an easy-to-use liquid "glue" to increase the adhesion of the first layer during printing. Good adhesion of the first layer is important, as this layer forms the basis of the entire print. MAGIGOO is water soluble, so it is easy to remove after printing. After each print, we recommend removing the adhesive with a damp cloth to prevent excess build-up of MAGIGOO adhesive on the printing surface.
Filament - made from TPE flexible and matte, filament diameter: 1.75mm with a tolerance of 0.1mm, weight: 0,5kg, print temperature: up to 230°C, recommended print speed: from 10mm/s to 20mm/s
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 60°C
3D Printer Accessory Ideal for materials: NYLON PAJET 160. MAGIGOO is an easy to use liquid "glue" to increase the adhesion of the first layer during printing. Good adhesion of the first layer is important, as this layer forms the basis of the entire print. MAGIGOO is water soluble, so it is easy to remove after printing. After each print, we recommend removing the adhesive with a damp cloth to prevent excess build-up of MAGIGOO adhesive on the printing surface. Works on both glass and Ultem backing.
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1,5kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,75kg, print temperature: up to 260°C, print mat temperature: 110°C
Filament - made from TPE flexible and matte, filament diameter: 1.75mm with a tolerance of 0.1mm, weight: 0,5kg, print temperature: up to 230°C
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 40mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.01mm, weight: 0,5kg, print temperature: up to 230°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,5kg, print temperature: up to 270°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s