SMC WBR14S-N3

Perfect solution from SMC for the possibility of extending high-speed cable Internet connection in your office or home. This model bearing WBR14S-N3 offers the possibility of the spread of computers sharing both the Internet and other network resources via wired or wireless connection. There will be a total of four Ethernet ports, RJ-45, offering transfer speeds up to 100Mbps, support for IEEE 802.3 and 802.3n. The network element can also be connected wirelessly. Integrated Wireless Access Point provides support operates at 2.4 GHz and supports almost all standards of the family 802.11.

The signal is amplified two mA routable antennas that provide particularly high quality and stable income and a transfer rate of up to 300 Mb/s.Wireless transmission itself may very well be secure, particularly because the model WBR14S-N3 supports WPA and WPA2, as well as offering the possibility of filtration, both IP and MAC and jersey, and last but not least, you can also set the dual SSID or PIN code. The actual device is set up is very fast and simple, everything can be done through a Web browser. For a quick check of cabling and associated activities of the various ports will be a simple LED.

Technical Specifications:

Ports:
1x WAN 10/100 Mbps
4x LAN 10/100 Mbps
2x 2 dBi Antenna

Buttons:
WPS button
Reset

LED indicators:
Power
LAN (Ethernet Link/Activity)
WAN (Ethernet Link/Activity)
WLAN (Wireless Link/Activity)
WPS (WPS in progress)

Management Features:
EZ Setup Wizard
Administration via a Web interface (HTTP)
Remote Administration
SNTP time synchronization
UPnP Support
Firmware Upgradeable

Safety:
NAT Firewall with SPI
Intrusion Detection
Access Control
MAC, IP and Port Filter
DMZ Host
Option to turn off SSID broadcast
Wireless MAC address filtering
Support for WEP encryption 64-/128-bit
Support WPA-/WPA2-PSK (Pre-Shared Key, TKIP, AES)
Support WPA/WPA2 Enterprise mode (802.1x)
Support for WiFi Protected Setup (WPS PBC and PIN method)

Router Features:
Connector for high-speed cable/xDSL internet connection
4-port 10/100 LAN switch with auto MDI-MDIX
Built-in wireless access point supporting a speed of 300 Mbps
Support satického Routing
Dynamic RIP v1/v2 routing support
NAT support, NAPT
Podpora Wireless Distribution System (WDS)
Provides 802.11 Wi-Fi Multimedia (WMM)
Popdora IGMP Proxy
Support Dual SSID
Support for dynamic DNS
Podpora DNS Proxy
-In Virtual Server
Supports DHCP server

Podprované standards:
Wired: IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX)
Wireless: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

Operating frequency:
FCC: 2412-2462 MHz (Ch1 to Ch11)
ETSI: 2412 to 2472MHz (Ch1 to Ch13)
Japan: 2412 to 2484MHz (Ch1 to Ch14)

TX Output power:
802.11n:17 +/- 1 dBm
802.11g: 17 +/- 1 dBm
802.11b: 20 +/- 1 dBm

Temperature:
Operating: 0 to 40 ° C
Storage: - 20 to 60 ° C

Humidity:
Operating: 10-85%
Storage: 5-90%

Dimensions:
185 x 138 x 35 mm

Weight:
255 g

Power:
Input: 110 or 240 VAC, 50-60 Hz
Output: 5V/2A

Package Contents:
SMCWBR14S-N4
Power Adapter
RJ45 cable
QIG
Documentation on CD