ASROCK B860 Rock WiFi 7
ASROCK B860 Rock WiFi 7
The ASRock B860 Rock WiFi 7 motherboard connects key hardware components into one stable unit and facilitates their communication. This ATX format board, measuring 305×244mm, is aimed at users building a high-performance computer with Intel Core Ultra Series 2 processors. The board features a modern Intel 1851 socket and an Intel B860 chipset, which together form the foundation for the stable operation of the entire system. It provides advanced technologies for installing fast DDR5 RAM and graphics cards with a PCIe 5.0 interface.
Intel B860
Chipset
Intel 1851
Socket
ATX
Format
DDR5
Memory type
4
Number of RAM slotsKey features of the ASRock B860 Rock WiFi 7 motherboard
- Intel B860 chipset, Intel 1851 socket, and ATX format
- Four DDR5 memory slots with a total capacity of up to 256GB
- Features a PCIe 5.0 x16 slot, a PCIe 4.0 x16 slot, and a Wi-Fi 7 wireless module
- Storage system includes one M.2 PCIe 5.0 slot, two M.2 PCIe 4.0 slots, and four SATA III connectors
- Dragon network card offers 2.5Gb/s speeds, complemented by Wi-Fi 7 with Bluetooth 5.4
- 8+1+1+1+1 phase power system with Dr.MOS technology
- Functions include the EZ DIY system, Post Status Checker LEDs, and a pre-installed I/O shield
Stable power supply with Dr.MOS technology
The power cascade uses an 8+1+1+1+1 phase configuration for smooth power delivery to the processor. Integrated Dr.MOS power stages efficiently handle high current loads and maintain low operating temperatures. The reinforced Hi-Density Power Connectors withstand high currents and reduce the risk of overheating during intense loads. In addition, the six-layer PCB contributes to better power efficiency and signal stability.
DDR5 support
The board includes four slots for DDR5 RAM with Dual-Channel mode support. Users can install memory modules with a total capacity of up to 256GB. Intel XMP and AMD EXPO profiles make it easy to set higher memory frequencies directly in the system interface. Fast memory modules operate in overclocking mode at frequencies up to 8666MHz. Stable signal paths on the multi-layer PCB help maintain reliable memory operation.
Fast PCIe 5.0 storage and Wi-Fi 7 wireless standard
For installing fast SSDs, there is a Blazing M.2 slot with PCIe 5.0 x4 interface support. This interface offers a throughput of up to 128Gb/s for lightning-fast data transfers. Two additional Hyper M.2 slots operate on the PCIe 4.0 x4 interface and supplement the total storage capacity. The drives are cooled by an Aluminium Heatsink, which dissipates heat and prevents performance drops at high temperatures. The board also offers four classic SATA III ports. Wireless connectivity is handled by a modern Wi-Fi 7 module, which offers extreme transfer speeds and very low latency. Multi-link Operation technology uses multiple bands simultaneously for smooth streaming and a stable connection. The integrated Bluetooth 5.4 interface is used for connecting wireless peripherals. A classic wired network connection is provided by the Dragon 2.5G LAN chip with high data throughput.
Modern interface, rich features, and easy installation
The graphics output from a processor with an integrated graphics core is provided by an HDMI 2.1 connector with high-resolution support. The rear panel includes fast USB ports for connecting external devices and peripherals. The audio output is handled by a Realtek ALC897 chip with a 7.1 channel configuration. The durable Reinforced Steel Slot can safely support even heavy graphics cards and protects the socket from mechanical damage. The EZ DIY system simplifies the assembly and subsequent setup of the entire computer. The pre-installed rear I/O shield speeds up the installation of the board into the computer case. Post Status Checker diagnostic LEDs immediately show the status of key components when the system starts up. SSD installation is made easier by the quick-release system, which does not require a screwdriver. The Auto Driver Installer tool automatically installs the necessary drivers after the first internet connection.
Port equipment
Storage
- Number of SATA III: 4
- Number of M.2: 3
- M.2 Slot - 2× Hyper M.2 PCIe Gen4x4
- M.2 Slot - Blazing M.2 PCIe Gen5x4
- Functions: RAID 0, RAID 1, RAID 5, RAID 10
USB ports
- Internal USB 2.0: 4×
- Internal USB 3.2 Gen1 Type-A: 2×
- Internal USB 3.2 Gen1 Type-C: 1×
- Rear USB 3.2 Gen1 Type-C: 1×
- Rear USB 3.2 Gen1 Type-A: 6×
- Rear USB 2.0: 2×
Graphics
- HDMI 2.1
- Graphics outputs: HDMI
Sound
- Number of channels: 7.1
- Rear connectors: Line in / Front speaker / Microphone
- Sound card: Realtek ALC897
Other
- Rear: Flash BIOS button, RJ-45 (LAN) 2.5 Gbps, 2× Wi-Fi antenna
- Power: 24pin ATX, 8pin 12V
- Cooling: Number of CPU Fan (4-pin) - 2, Chassis Fan (4-pin) - 4, AIO pump (4-pin) - 1
- Internal: 1× RGB LED Header, 3× Addressable LED Headers
- Wireless connectivity: Wi-Fi 7 (802.11be, 2.4/5/6 GHz), Bluetooth 5.4
Choosing a motherboard
When choosing a motherboard (also known as a mainboard), it's important to pay close attention to the socket type, form factor, and chipset. These are the most critical parameters, ensuring the board is compatible with the processor, expansion cards, and other components. The specific socket determines your choice of processor, while the other connectors will dictate which components you'll need for your future PC build.Specifications
Socket and chipset
Format & functions
Memory
Advanced parameters
Connectors
Compatibility
Colour
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
