Würth Winter grout WIT Nordic 300 ml
Würth Winter grout WIT Nordic 300 ml
Key features of the Würth WIT Nordic winter injection mortar, 300ml
- Winter mortar (for installation down to -20°C) for concrete and masonry
- Two-component chemical anchor, styrene-free vinylester
- Ideal for construction work in winter
- Can be used with an ambient and mortar temperature from -20°C
- Cartridge temperature and storage from -20°C
- Single point anchoring, cracked and non-cracked concrete, seismic category C1 – W-VI-A anchor rod, W-VD-A anchor rod, standard threaded rod with 3.1 test certificate
- Single point anchoring in masonry – SH perforated sleeve, W-VI-A anchor rod, standard threaded rod with 3.1 test certificate
- Cartridges can be used until the expiry date – just replace the static mixer or seal with the sealing cap
- Suitable for fastening wooden and metal structures, metal profiles, brackets, grilles, sanitary equipment, pipes, cable ducts, etc.
Proof of performance:
European Technical Approval ETA-12/0164: Single point anchoring + cracked and non-cracked concrete (W-VI-A anchor rod, W-VD-A anchor rod, standard threaded rod with 3.1 test certificate), seismic category C1
European Technical Approval ETA-16/0757: Single point anchoring + masonry (SH perforated sleeve, W-VI-A anchor rod, standard threaded rod with 3.1 test certificate)
Please note:
WIT-NORDIC is suitable for use in extremely low temperatures (cartridge, environment and base material) from -20°C. Use at a temperature (cartridge, environment or base material) above +20°C is not recommended.
Specifications
Features
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
