Endorphs Zephyr 92
Endorphs Zephyr 92
The Endorfy Zephyr 92 PC fan optimises airflow and effectively cools components in smaller computer cases. With dimensions of 92×92×25mm, the fan can be installed in Mini-ITX and Micro-ATX builds. The fluid dynamic bearing (FDB) actively suppresses friction and vibration, allowing the fan to operate with low noise. The FDB fan therefore works as a quiet PC fan even at its maximum speed of 1900RPM. Its steady performance generates a consistent airflow that cools key components. It connects to the motherboard using a standard 3-pin connector and requires a voltage of 12V. A mean time between failures (MTBF) of 80000 hours demonstrates its focus on long-term operation.
Key features of the Endorfy Zephyr 92 PC fan
- Ensures effective air cooling
- Features a fluid dynamic bearing (FDB) to reduce friction and noise
- Provides a maximum speed of 1900RPM
- No speed control, ensuring constant performance
- Requires an operating voltage of 12V
- No backlighting
- Includes a 3-pin power connector
- Offers a long lifespan with an MTBF of up to 80000 hours
Fan FDB bearing
The fluid dynamic bearing (FDB) is the foundation of the fan's quiet operation. The technology works on the principle of a thin layer of oil between the moving parts, which eliminates direct contact between metal surfaces. This mechanism actively suppresses both vibration and operating noise. The reduced wear also extends the mean time between failures (MTBF) to 80000 hours, which is equivalent to more than nine years of continuous operation.
Fan performance in compact PC cases
With dimensions of 92×92×25mm, you can use the fan in smaller computer cases, such as Mini-ITX and Micro-ATX builds. In space-constrained conditions, it efficiently dissipates heat from the processor, graphics card and other components that get hot. The fixed speed of 1900RPM creates a steady and predictable airflow without the need for manual adjustment. You can install the fan to draw in cool air from the surroundings or to exhaust it from the case. The connection via a standard 3-pin connector is supported by most motherboards.
Installation and design
You can install the PC fan in a matter of minutes using the included mounting screws. Simply attach the fan to the designated position in the case and plug the 3-pin connector into the motherboard. The uniform black finish on both the frame and blades follows a functional design without any distracting elements. The absence of RGB backlighting will appeal to users who are building a performance-focused system and prefer a subtle look. The quality of the materials used and the bearing construction ensure a long lifespan.
Format:
92×25mm
Bearing type:
Fluid Dynamic Bearing (FDB)
Rotational speed:
1900RPM
Speed control:
No speed control
Backlight colour:
No backlighting
RPM Voltage:
12V
Specifications
Backlight
Fan speed
Technical specification
Dimensions
Pack
Connectors
COOLING sp. z o.o, úl. Sokolovská 24, 05-806 Sokołów [email protected]
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
