GIGABYTE M720-US3

Interesting motherboard built on the chipset NVIDIA nForce 720D Socket AM2 + with. There can be fitted to the latest Phenom processors, as well as older Athlon and Sempron. Tile is proud of the new Executive FSB Hyper Transport 3.0, which operates at a frequency of MHz to 2600. Present there are four slots for DDR2 memory up to a frequency of 1200 MHz and a total maximum capacity of 16 gigabytes For connecting drives and hard drives used a total of 6 SATA connectors and one PATA interface, of course there is also support RAID.

Parameters and specifications:

Processor:
Socket AM2 +
CPU: AMD Phenom FX, Phenom X4, Phenom X3, Athlon X2, Athlon, Sempron

Chipset:
NVIDIA nForce 720D

Memory:
Dual channel memory controller
4 slots for up to16 GB of memory
Supports 240 pin DDR2 1200/1066/800/667 MHz

Expansion Slots:
1 x PCI Express x16 v2.0
2 x PCI Express x1
4 x PCI

Disk controller:
6 x Serial ATA II RAID 0, 1, 5, 10, JBOD
1 x Ultra ATA 133

Network card:
1 x Realtek 8211C chip (10/100/1000 Mbit)

Audio:
Realtek ALC888 codec

Inputs and outputs:
1 x PS/2 keyboard
1 x PS/2 mouse
1 x S/PDIF Out (Optical)
1 x S/PDIF Out (Coaxial)
8 x USB 2.0/1.1
2 x IEEE 1394a
1 x RJ-45
6 x Audio I/O

Expansion connectors:
2 x USB 2.0 connectors (4 connectors)
1 x Serial port
1 x IEEE1394a
1 x S/PDIF output

Power:
1 x 24-pin ATX 2nd0
1 x 4-pin ATX 12 V

Dimensions:
305 x 215 mm, ATX