Archive - Cylindrical Shank Clamping

BOSCH Sukovník osazený tvrdokovem 30 x 56 mm, d 8 mm 2.608.596.980

Drill Bit

Discontinued

Order Code: BOCh6181

BOSCH Sukovník osazený tvrdokovem 26 x 56 mm, d 8 mm 2.608.596.979

Drill Bit

Discontinued

Order Code: BOCh6180

BOSCH Disc wire brush, crimped wire, 100×0.3 mm, steel 1.609.200.273

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5970

BOSCH Disc wire brush, crimped wire, 75×0.2 mm, steel 1.608.622.015

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5969

BOSCH Disc wire brush, crimped wire, 100×0.2 mm, steel 1.609.200.274

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5971

BOSCH Cup brush, crimped wire, 70×0.2 mm, steel 1.609.200.271

Cup Brush The pot wire brush provides excellent fine surface finish. It is equipped with a crimped wire for less and moderate cleaning. It is suitable for removing coatings and rust and for cleaning formwork and cladding boards. This brush is ideal for use on steel surfaces and is also suitable for roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5926