Archive - Disc Brushes

Verk 11402 Set of cleaning brushes and polishing discs for drill 22 pcs

Sanding Brush for drill - bowl and disc, for polishing, cleaning, on metal, wood, stone and plastic, material steel, crimped wire, max. 3000 rpm, clamping with M10 thread

Discontinued

Order Code: WSaaa3443

3.0 2×

Verk 11401 Set of cleaning brushes and polishing discs for drill 27 pcs

Accessory Kit - for cleaning tiles, Couplings, stoves, floors, carpets, etc., 27 pcs in total

Discontinued

Order Code: WSaaa1549

BOSCH Disc wire brush, crimped wire, 100×0.3 mm, steel 1.609.200.273

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5970

BOSCH Disc wire brush, crimped wire, 75×0.2 mm, steel 1.608.622.015

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5969

BOSCH Disc wire brush, crimped wire, 100×0.2 mm, steel 1.609.200.274

Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.

Discontinued

Order Code: BOCh5971