Archive - Wire Wheels
Choose an alternative in the category
Wire Wheels
52
Results
Sanding Brush for drill - bowl and disc, for polishing, cleaning, on metal, wood, stone and plastic, material steel, crimped wire, max. 3000 rpm, clamping with M10 thread
Discontinued
Order Code:
WSaaa3443
Discontinued
Order Code:
GARhob0048
Discontinued
Order Code:
GARhob0042
Discontinued
Order Code:
GARhob0047
Discontinued
Order Code:
GARhob0046
Discontinued
Order Code:
GARhob0043
Discontinued
Order Code:
GARhob0041
Discontinued
Order Code:
GARhob0044
Accessory Kit - for cleaning tiles, Couplings, stoves, floors, carpets, etc., 27 pcs in total
Discontinued
Order Code:
WSaaa1549
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5970
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5969
Sanding Brush The disc wire brush provides a good fine surface finish. It features a crimped wire for less and moderate cleaning of smaller surfaces. It is ideal for removing annealing on welds. The disc wire brush is suitable for cleaning at high circumferential speed for smaller surfaces, edges and grooves. It is also suitable for rust removal, roughening, matting and paint removal. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
Discontinued
Order Code:
BOCh5971
Discontinued
Order Code:
BOCh5654
Discontinued
Order Code:
BOCh5652
Discontinued
Order Code:
BOCh5649
Discontinued
Order Code:
BOCh5651
Discontinued
Order Code:
BOCh5648
Discontinued
Order Code:
BOCh5642
Discontinued
Order Code:
BOCh5645
Discontinued
Order Code:
BOCh5644
Discontinued
Order Code:
BOCh5643
Discontinued
Order Code:
BOCh5619
Discontinued
Order Code:
BOCh5613
Discontinued
Order Code:
BOCh5637