MakTrade HRC 100
MakTrade HRC 100
The MakTrade HRC 100 heat recovery unit is designed to maintain a constant exchange of air in an enclosed space. The device is equipped with a regenerator which accumulates thermal energy from the air leaving the room and heats the air entering it, ensuring minimal heat loss (the heat recovery unit's efficiency is greater than or equal to 90%). The casing, grille and blades are made of ABS plastic, which is resistant to moisture and damage. The device meets all applicable standards for electromagnetic compatibility (EMF). The heat recovery unit is equipped with highly efficient direct-drive EC (electronically commutated) motors, which ensure quiet operation, long life and low electricity consumption.
Key features of the MakTrade HRC 100 heat recovery unit
- Provides continuous air exchange in enclosed spaces
- Integrated heat recovery unit with ≥ 90% efficiency minimises heat loss
- Accumulates heat from extracted air and uses it to heat the incoming air
- Automatically alternates between extract and supply mode in 60-second intervals
- Brings in fresh air while simultaneously removing stale air from the room
- Designed for continuous operation
- High-efficiency direct-drive EC (electronically commutated) motor
- Meets electromagnetic compatibility (EMC/EMF) requirements
- Suitable for flats, offices, bedrooms, studies and other residential or commercial spaces
The device's operating cycle includes the following steps:
Step I: Stale warm air is extracted from the room in extract mode. As the air passes through the regenerator, it heats it up. After 60 seconds, once the regenerator has accumulated heat, the fan switches to supply mode.
Step II: In supply mode, cool fresh air passes through the regenerator and is warmed to room temperature. After 60 seconds, as the regenerator cools down, the fan switches back to extract mode.
Technical specification:
Power supply: 220–240V
Frequency: 50Hz
Motor power consumption: 2/4W
Speed: I / II
Air extraction rate: 18/27m³/h
Speed: 1300/2500rpm
Noise level: 10–25dB(A)
Airflow: 10–20m³/h
Operating temperature: -20°C to +50°C
Telescopic duct length: 320–550mm
Weight: 1.54kg
Connection diameter: 100mm
Filters: G2/G4
Heat recovery efficiency: ≥ 90%
Energy class: A
Ingress protection: IP-X2
Specifications
Colour
Assembly
Efficiency
Features
Control
Dimensions
Electricity consumption
MAREX TRADE s.r.o., K Šeberáku 180/1, 14800 Praha- 4 Kunratice, [email protected], +420 607 032 153
Specifications can be changed without notice. Images are for illustrative purposes only.
