OUTEQ 1400lm IP68 Flashlight FL2 with Diving Mode

- Help and manuals
- Specifications
- Photos & Videos 13
- Alternatives 8
- Accessories and suggested products
OUTEQ 1400lm IP68 Flashlight FL2 with Diving Mode
OUTEQ FL2 is a rechargeable handheld LED torch with a dedicated diving mode and IP68 protection. Unlike torches that are only splash-resistant, it is designed for immersion, meaning you can use it underwater as well as for regular outdoor activities. Inside, it runs on a replaceable 21700 battery and recharges via the included battery charger.
Key features of the OUTEQ 1400 lm IP68 FlashLight FL2 with Diving Mode
- Diving mode and IP68 protection: torch is built for submersion, not just splash protection
- Replaceable 21700 battery: replace only the cell when worn out, not the whole torch
- Battery charging via charger: charge the battery with a standard USB-A to USB-C cable via a charging adapter
- Five light levels with single-button switching: from eco-friendly low light to full power, plus strobe and SOS
- Anodised aluminium body: durable design with good heat dissipation and a HOT warning on the head
Light for land and water
OUTEQ FL2 combines a handheld torch with a dedicated diving mode, making it suitable for use on land and underwater. The IP68 rating means the torch is designed for immersion, not just resistance to rain or splashes. You will notice the difference during recreational diving, night snorkelling, or working near water, where a regular waterproof torch is simply not enough. If you are looking for a light solely for dry outdoor use, you might not utilise this feature, but the robust body will serve you well regardless.
IP68 protection and what it means underwater
The IP68 rating describes two things: complete dust protection and the ability to withstand long-term submersion, unlike lower protection classes that only account for brief splashing. O-rings provide sealing for the FL2, which you should check and keep clean before every dive. We do not list a specific depth limit as a measured figure because the rating is currently supported by the manufacturer's declaration; therefore, view the torch as built for immersion according to the manufacturer, rather than a tool with an independently verified depth limit. For recreational use near and under water, this represents a significant upgrade over torches that only handle rain.
Five light levels and single-button switching
Operate the torch via the side button, which offers five modes: high, medium, low, strobe, and SOS. Use the high mode for maximum beam distance, and the low mode for reading maps or moving around camp, where full power would otherwise dazzle you and drain the battery unnecessarily. Strobe and SOS modes serve for signalling, such as during water navigation or when calling for help. The manufacturer states a luminous flux of up to 1400lm, and you can easily switch between modes with one hand, even while wearing gloves.
Replaceable 21700 battery and charging via charging adapter
Inside the FL2 lies a replaceable 21700 Li-ion cell with a declared capacity of 3000mAh. Since the battery is not sealed inside the body, you can replace the cell itself after years of use or carry a charged spare for longer trips, rather than buying a whole new torch. Recharging takes place via the charging adapter using the USB-A to USB-C cable included in the box. For short trips, one cell is plenty, while a charged spare comes in handy for multi-day expeditions.
Anodised aluminium body
The body of the FL2 is made of aluminium alloy with an anodised finish, which resists corrosion and helps dissipate heat during prolonged use on full power. It is because of this heat that a HOT warning is stamped on the head; after prolonged operation in high mode, make sure to hold the torch by the body, not the reflector. A coloured ring near the head helps you quickly identify the torch in your backpack or among other gear. With dimensions of 156×43×30mm and a weight of 195g, the FL2 ranks among compact handheld torches that you can carry comfortably in one hand or in a jacket pocket.
Technical information
- Type: rechargeable LED torch with diving mode
- Luminous flux: up to 1400lm (manufacturer declared)
- Modes: 5 levels: high, medium, low, strobe, SOS
- Battery: 1× 21700 Li-ion, 3000mAh, replaceable
- Charging: USB-C, 5V⎓1A input
- Voltage: 3.7V DC
- Rated power: 15W (max)
- Protection: IP68 (manufacturer declaration)
- Body material: aluminium alloy, anodised finish
- Dimensions: 156×43×30mm
- Weight: 195g
- Colour: black
Package contents:
1× OUTEQ FL2 torch, 1× 21700 Li-ion battery, 3000mAh, 1× cell charger, 1× USB-C cable, 1× wrist strap, instructions for use
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
S-Cube s.r.o.;Krajankova 3176/2, Prague, 141 00, Czechia, +420 608663085
Specifications can be changed without notice. Images are for illustrative purposes only.

