Ubiquiti ETH-SP-G2 - Ethernet surge protector
Ubiquiti ETH-SP-G2 - Ethernet surge protector
Ubiquiti ETH-SP-G2 Ethernet surge protector protects outdoor units and other sensitive network devices. Support for transfer speeds of up to 1Gbps and compatibility with PoE power (including active 802.3af and passive 24/48V) ensure easy integration into most modern networks. The surge protector diverts damaging electrostatic discharges and surges directly into the ground, effectively protecting your equipment from damage. ETH-SP-G2 features two RJ-45 ports (input and output) and is suitable not only for Ubiquiti products, but also for other network devices you need to protect from the elements or sudden electrical spikes.
Key features of the Ubiquiti ETH-SP-G2 Ethernet surge protector
- Transfer speeds of up to 1Gbps
- Protection against surges and electrostatic discharges
- Suitable for PoE-powered devices (24/48V and 802.3af)
- Two RJ-45 ports (input and output)
- Compatibility with outdoor units
- Grounding option for maximum protection
- Support for passive 24/48V and active 802.3af PoE power
Technical specifications
- Dimensions 91×61×32.5mm (3.58×2.4×1.28")
- Weight 30g
- 2× RJ-45 (input + output)
- ESD/EMP protection - Transient current absorption with response to surge voltage from 100V/s to 1kV/us
- DC spark-over voltage 90V @ 100V/s
- Maximum impulse spark-over voltage 700V @ 1kV/us
- Discharge current 15kV
- Maximum insulation resistance 1GΩ @ 50V
- Maximum capacitance 1.0pF @ 1MHz
- Data line protection Ethernet RJ45 10/100/1000
- PoE IEEE 802.3af support
- Shock and vibration certification - ETSI300-019-1.4 standard
- Operating temperature –30 to 65°C (–22 to 149°F)
- Operating humidity 10 to 90% non-condensing
Specifications
Male connectors
Connector
Features
Design
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
