AlcoForce Raptor
AlcoForce Raptor
The AlcoForce Raptor breathalyser is designed to work even in police conditions. Thanks to its fast, modern electrochemical sensor, a measurement only takes 4 seconds. The result is then instantly displayed on the easy-to-read LCD display. Both active and passive measurement modes are also available. The AlcoForce screening breathalyser combines an aggressive look with incredible speed. It is also an extremely durable device, with a continuous operating time of up to four hours. The colour LCD display indicates the approximate concentration of alcohol in the exhaled air. When alcohol is detected, the red signal and the LCD display light up. Since there is no need to buy mouthpieces, you have no additional costs. Simply turn on the AlcoForce Raptor, wait a moment and blow. The resulting value will appear on the tester's display in no time.
Key Features of the AlcoForce Raptor Breathalyser
- Electrochemical breathalyser
- Measurement time of only 4 seconds
- Active and passive measurement modes
- Passive measurement without a mouthpiece
- No extra costs as there is no need to buy mouthpieces
- Extensive menu to check settings, saved results and time until the next calibration
- Continuous operating time of up to four hours
- Backlit LCD display
- User settings can be protected with a five-digit password
- Extremely durable device
- Calibration recommended every 12 months or 4,000 measurements
- Supports four languages – Polish, Czech, German, and English
Active and Passive Measurement
The AlcoForce Raptor breathalyser supports direct measurement of alcohol concentration in exhaled air. Thanks to its high-quality design, there is no need to use a mouthpiece. Passive measurement is also available, where the breathalyser takes a flowing sample using the power button. This measurement is used if the person being tested is unwilling or unable to perform a measurement, or it is used to check the contents of containers.
New AlcoForce Breathalysers Calibrated by the Manufacturer
The manufacturer will calibrate AlcoForce breathalysers purchased within the last 12 months completely free of charge. For older devices, calibration can be performed for a fee. Calibration is the process of verifying the breathalyser's results against reference values. During calibration, the device's sensor and software are adjusted so that the indication of alcohol content in the air on the display is identical to the alcohol content shown on the standard bottle in the simulator-calibrator. The frequency of calibration depends on the breathalyser model and the technology of your sensor. Breathalysers with electrochemical sensors are calibrated less frequently than models with semiconductor sensors.
Extensive Menu
The extensive menu allows you to check the breath test settings, the saved results, and the remaining time until the next calibration. The manufacturer has enabled each user to set up the breathalyser according to their own preferences with the option to secure them with a five-digit password. The device operates in four languages: Polish, Czech, German, and English.
Package Contents:
Breathalyser, case, box, 4× AA alkaline batteries, manual
Dimensions:
68.5 × 284 × 74mm (W × H × D)
Weight with batteries:
399g
Measurement Accuracy:
+/-0.1‰ at 1.0‰
Measurement Range and Presented Result Accuracy:
0.00‰–5.00‰ with an accuracy of 0.01‰
Specifications
Features
Functions
Power Supply
Dimensions and weight
Packaging
Specifications can be changed without notice. Images are for illustrative purposes only.
