EUROL Engine Flush 500 ml
EUROL Engine Flush 500 ml
Eurol Engine Flush is a high-quality motor oil additive designed to flush, clean, and rinse petrol and diesel engines, including hybrids. Using the additive with every oil change ensures better removal of deposits and impurities from the engine. Eurol Engine Flush tackles existing engine contamination and prevents future build-up as the new oil stays cleaner and contains fewer residues from the old oil. It significantly improves throttle response and acceleration in cars, trucks, buses, tractors, and other vehicles, while reducing fuel consumption. The product is safe to use, solvent-free, and does not damage seals or sealing components.
Key features of EUROL Engine Flush additive, 500ml
- High-quality motor oil additive
- Works simply and effectively without the need for engine flushing equipment
- Suitable for wet-belt engines (belt-in-oil)
- Significantly improves throttle response
- Yellow colour
Application:
Warm up the engine for approximately 5 minutes at idle, then add the additive to the old oil in the sump (500ml for 3.5 to 6.5L of oil). For larger engines, use a 1:10 ratio (100ml per litre of oil). Run the engine for at least 5 minutes (15 minutes for optimal results). Drain the old motor oil, replace the oil filter, and fill the engine with new oil. Use with every oil change to extend the life of both modern and older engines.
Density at 20°C:
0.8668kg/L
Pour point:
-30°C
Flash point:
164°C
Viscosity index:
95
Kinematic viscosity at 40°C / 100°C:
21.7mm²/s / 5mm²/s
Specifications
Volume
Usage
Season
Type
Features
Dosage
Eurol BV, Energiestraat 12, 7442 DA Nijverdal, The Netherlands, +31548615165
Specifications can be changed without notice. Images are for illustrative purposes only.
