Metabond 4T for motorcycles and four-stroke engines, 250 ml
Metabond 4T for motorcycles and four-stroke engines, 250 ml
Metabond 4T Racing is one of the most advanced metal surface finishers for four-stroke motorcycle engines. Its development was played by racing teams. After application to the engine, it significantly reduces friction and improves the lubricity of the engine oil. You can use it for both older and new four-stroke petrol engines found in motorcycles or quads. Apply only with engine oilprescribed by the manufacturer. Metabond 4T does not contain Teflon, chlorine, phosphates or ceramics - it is 100% safe for both engine and clutch.
Key features of Metabond 4T additive for motorcycles and four-stroke engines, 250ml
- Can reduce friction losses by up to 60%
- Increased compression
- Reduces fuel and oil consumption
- Reduces engine noise
- Suitable for racing machines as well as everyday use
- Suitable for dry and wet clutches
Use
The additive can be mixed with both mineral and synthetic oil. Add it in a ratio of 5% to the new engine oil, 50ml of Metabond 4T per 1 litre of engine oil. The manufacturer recommends that the additive be used whenever oil is changed.
Additional Information:
Colour Code ASTM-D 1500-07: 4.5 ASTM
Kinematic viscosity at 40°C, STN EN ISO 3104: 1996: 70,05mm2/s2/s
Kinematic viscosity at 100°C, STN EN ISO 3104: 1996: 10,5mm2/s2/s
Acid number (TAN) ASTM D 664-07: 3.2 mg KOH/g
Total alkalinity number (TBN) ASTM D 4739-08: 16 mg KOH/g
Corrosive effect on copperplates (100°C, 1 hr.) EN ISO 2160: 2000: 1a - degree of corrosion
Specifications
Volume
Usage
Season
Type
Features
Dosage
Race Print GP s.r.o., V Zeleném údolí 1304/15, 148 00 Praha-Kunratice, [email protected], +420 722 413 418
Specifications can be changed without notice. Images are for illustrative purposes only.
