MULTIPA for 13-pin / 4 m lift with lights MD

MULTIPA for 13-pin / 4 m lift with lights MD
- Bayonet connector: YES
- The cable length: 4 m
- Plug: 13-PIN
- Spacing for fixing lights: 150mm
- Dimensions of the lamps: 215 x 100 mm
- Homologated: E11
- Contents of the assembly:
- 1x compound light MD-36 with bayonet socket, left with fog light - lamp includes: direction, brake, marker, fog and number plate lights
- 1x compound light MD-36 with bayonet socket right with reversing light - lamp includes: direction, brake, marker, reversing, number plate light
- Can be used on lifts with a maximum overall length of 3.4 m
- Route the electrical wiring under the tow to the locations specified by the manufacturer
- Connect the wiring to the lights to the bayonet connectors, left side (lamp with fog light) orange connector, right side (lamp with reversing light) green connector
- If the tow allows you to do so, either connect the front position lights to the prepared extra cable, if it is included in the product, or bring an external wire to the position lights
- The lamps are factory fitted with 12V bulbs
Specifications
Usage
Plug
Bayonet
Equipment
VAPOL CZ s.r.o., Zašová 270, 756 51 Zašová, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.

