
Imagine a power outage a few seconds before you wanted to save your work. The unsaved work is irretrievably lost, and you have to start all over again. Similar heart-stopping situations can be forestalled by the CyberPower UT850EG backup source, or UPS. This hardware is practically a large battery that provides power for all devices that need electricity. The CyberPower UT850EG UPS has the Line interactive design approach. Off-line is classified as the simplest form if the electricity is interrupted, since it connects to the battery and disconnects from the mains power. The line interactive UPS enhances the simpler off-line version of voltage regulation to guard against dangerous surges travelling along data lines.

A key parameter is the UPS run time during outages. This depends on the power consumption of the connected devices – for example, at half-load (50%), the UPS power time will last a longer amount of time. It is therefore necessary to estimate the energy consumption of the connected electronics and it is a good idea to add some spare power left. The CyberPower UT850EG specifies the apparent power as 850, but in reality, the actual usage matches the value of 425 W.
Cyber Power Systems, B.V., Flight Forum 3545, 5657 DW Eindhoven, Netherlands, [email protected], +31-(0(40-234-8170
Specifications can be changed without notice. Images are for illustrative purposes only.