ELISE EURO 10 PB
ELISE EURO 10 PB
ELÍZ EURO 10 PB is an electric non-pressure heater with a volume of 10 litres. It can be installed over a sink or kitchen sink. Thanks to the heater, you will have hot water for one or more points of use in your home, cottage and wherever there is no central hot water supply. A special non-pressure lever battery is also included, only with this supplied non-pressure battery the heater can be operated. It also stands out for its low energy consumption and high performance. In addition, it meets the demanding criteria of the Directive on the efficiency and energy consumption of water heating equipment.
Key features of the ELÍZ EURO 10 PB flow heater
- Quality steel tank with zirconium enamel
- Tank anode protection - magnesium anode protects the tank against corrosion
- High density polyurethane non-freon insulation with a thickness of 30 mm
- Low heat loss and low operating costs due to thick insulation
- Pressureless lever faucet included in the heater
- 3 years extended warranty on the heater tank
Easy operation
Set the optimum water temperature using the thermostat on the control panel. The water temperature can be set between 7-77 °C. The minimum thermostat temperature of 7 °C serves as a frost protection - this prevents the water inside the heater from freezing and causing irreversible damage. Of course, there is a thermal overheating protection. A waterproof switch with a heating indicator light allows control of the heating in progress and also serves to switch the appliance on and off.
Additional information:
Tension:
230V
Insurance:
10 A
Electrical protection:
IP 24
Water heating time from 12 °C to 65 °C:
24 minutes
Thermal losses:
0.36 kWh / 24 h
Energy efficiency class:
A
Insulation thickness:
30mm
Water connection:
G 1/2''
Maximum water pressure:
6 bar
Weight:
7,6 kg
ELÍZ – ohrievače vody s.r.o., Technická 7, 821 04 Bratislava, +420 725 881 505, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
