ELIZ EURO 30

- Reviews 5
- Help and manuals
- Specifications
- Photos & Videos 5
- Alternatives 8
- Accessories and suggested products
ELIZ EURO 30
The electric pressure water heater ELÍZ EURO 30 with a volume of 30 litres is suitable for one or more points of use. It is designed for vertical wall mounting. ELÍZ water heaters stand out not only for their functionality, efficiency and quality of workmanship, but above all for their low energy consumption and high performance. They meet the demanding criteria of the Directive on the efficiency and energy consumption of water heating equipment.

Key features of the boiler ELÍZ EURO 30
- CFC-free, high-density polyurethane insulation with a thickness of 33 mm
- Low heat loss and low operating costs due to thick insulation
- Safety - unique 6-stage protection
- Thermostat located on the control panel: range 7-75 °C
- ECO mode settings
- Water-resistant on/off switch with in-progress indicator light
- Hanging bracket and metal safety valve with check valve included in the heater
- Extended warranty of 5 years on the heater tank
The boiler that saves energy
The heater tank is made of high quality steel protected by a layer of zirconium enamel. High-quality CFC-free polyurethane insulation with a thickness of 33 mm guarantees low heat loss and cost savings for water heating. Using the thermostat on the control panel, you can set the water temperature in the range of 7-75 °C, with the option of setting the ECO mode. When set in ECO mode, the water is heated to an optimum temperature of 55 °C, with reduced heat loss and lower energy consumption. The minimum thermostat value serves as protection against water freezing in the heater. The heater has 2 built-in anode rods, which guarantees effective protection of the tank against corrosion and significantly prolongs its service life. A switch with a heater light is used to switch the heater on/off in our absence, which allows energy saving.
Additional information:
Voltage:
230V
Insurance:
10 A
Electrical protection:
IP 24
Water heating time from 12 °C to 65 °C:
1 hour
Thermal losses:
0.85 kWh / 24 h
Energy efficiency class:
A
Insulation thickness:
33mm
Water connection:
G 1/2''
Maximum water pressure:
6 bar
Weight:
14 kg
Specifications
Location
Heating
Heating housing type
Features
Energy specifications
Volume
Volume for gen. categories
Power consumption
Dimensions
Power outlet type
ELÍZ – ohrievače vody s.r.o., Technická 7, 821 04 Bratislava, +420 725 881 505, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.

