On this page you will find angle Sanders Bosch at the lowest prices, more so all angle Sanders Bosch ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is BOSCH Grinding wheel R444, Expert for Metal 2.608.605.467 marked at 170 Ft incl. VAT. Is this what you’re looking for?
338
Results
Sanding Brush - Potted, to remove rust, cleaning, on metal, material steel, braided wire, max. 4500 rpm, clamping with shank, brush diameter 65 mm, wire diameter 0.5 mm
Cutting Disc - diameter: 125mm, suitable for Metal
Discounted -11 %
4,400 Ft
4,990 Ft
In stock
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFA1a8
Diamond Disc - cutting, suitable for ceramics, classic, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min, X-Lock mounting
Discounted -27 %
4,490 Ft
6,200 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFA1a31
Diamond Disc - cutting, suitable for brick and stone, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2.4 mm, maximum speed 12250 rev/min
4,490 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC10a7
Sanding Pad - suitable for delta grinders, triangular plate shape, abrasive fastened with Velcro, exhaust holes included, dimensions 93 × 93 mm (W × D)
Diamond Disc - cutting, suitable for ceramics, classic, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min
Discounted -24 %
4,690 Ft
6,200 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC10b7
Grinding Wheel - diameter: 125mm, suitable for wood and drywall
Diamond Disc - cutting, suitable for concrete, stone, marble, masonry and tiles, segmented, diameter 115 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 13300 rev/min, X-Lock mounting
Cutting Disc - diameter: 355mm, suitable for Metal
Replacement Disc The X-LOCK N377 Metal Cleaning Wheel achieves fast results on metal surfaces and building materials. It incorporates a 3D open-structured fleece and enables high material removal rates without clogging the disc. The 3D fleece is also coated with carborundum, which restores its entire structure and creates sharp cutting edges: these allow for efficient and consistent material removal. The wheel is designed to cut, remove paint and oxide layers from metal as well as lime deposits, moss and graffiti from stone, marble and concrete. A fibreglass plate serves as a base for the cleaning disc. Changing the cleaning discs is easy and convenient thanks to the tool-free X-LOCK system.
Diamond Disc - cutting, suitable for ceramics and tiles, classic, diameter 115 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 13300 rev/min, X-Lock mounting
Sanding Brush - Potted, for cleaning, for wood and plastic, material nylon, straight wire, grain size 80, max. 4500 rpm, shank clamping, brush diameter 75 mm, shank diameter 6 mm, wire diameter 1 mm
Backing Pad - for angle grinders, soft, diameter 115 mm, flange thread M14, max. 13,300 rpm. /min
Grinding Wheel - diameter: 125mm, suitable for metal and steel
Backing Pad - for angle grinders compatible with the X-LOCK system, fine, diameter 115 mm, max. 13,300 rpm. /min, material thermostable plastic
Replacement Disc A fibreglass plate serves as a base for the cleaning disc. The N377 Best for Metal Cleaning Wheel achieves fast results on metal surfaces and building materials. It incorporates a 3D open-structured fleece and enables high material removal rates without clogging the disc. The 3D fleece is also coated with carborundum, which restores its entire structure and creates sharp cutting edges: these allow for efficient and consistent material removal. The wheel is designed to cut, remove paint and oxide layers from metal as well as lime deposits, moss and graffiti from stone, marble and concrete.
Replacement Filter The dust filter for small angle grinders protects against exposure to coarse dust particles. The result is longer tool life. It can be easily attached to the ventilation slots without tools and is easy to clean. The dust filter is designed for use when grinding metal, especially when using fibre ceramic discs. It is compatible with small angle grinders.
Grinding Wheel - diameter: 150mm, suitable for wood and drywall
Backing Pad - for angle grinders, standard, diameter 125 mm, flange thread M14, max. 12,250 rpm. /min
Diamond Disc - cutting, suitable for concrete and brick, cutting type turbo, diameter 230 mm, installation hole 22.23 mm, thickness 3 mm, maximum speed 6650 rev/min
Discounted -29 %
5,790 Ft
8,180 Ft
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC10a9
Diamond Disc - cutting, suitable for concrete, stone and granite, segmented, diameter 115 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 13300 rev/min
Sanding Pad - Suitable for Bosch angle grinders, plate shape circular, plate fixing with quick-release system, diameter 125 mm
Chcete doručit do České republiky? Jdi na
Úhlové brusky
Chcete doručiť tovar na Slovensko? Prezrite si
Uhlové brúsky
Für den Versand nach Deutschland, besuchen Sie bitte
Winkelschleifer
Für den Versand nach Österreich, besuchen Sie bitte
Winkelschleifer