Cheap cylindrical Shank Clamping
On this page you will find cylindrical Shank Clamping at the lowest prices, more so all cylindrical Shank Clamping ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is BOSCH Concrete drill CYL-3 5 × 90 × 150 mm, d 4.5 mm 2.608.597.677 marked at 1,390 Ft incl. VAT. Is this what you’re looking for?
215
Results
Drill Bit - conical shape, for wood, for metal, for masonry, for tiling, for plastic, with a diameter of 7mm and a length of 150mm, Cylindrical Drill Bit mounting, made of Hard metal,
Drill Set - spiral, diameter 1.1 mm, length 36 mm, working length 14 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
Drill Bit - conical shape, for wood, for metal, for masonry, for tiling, for plastic, with a diameter of 8mm and a length of 150mm, Cylindrical Drill Bit mounting, made of Hard metal,
Milling Cutter - grooving and forming, Stalk, for wood, 1 cutting edge, material carbide, head diameter 3 mm, shank diameter 8 mm, total length 51 mm, working length 8 mm
2,890 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOCh3318
Sanding Brush for drill - disc, to remove rust, cleaning, on metal and sheet metal, material steel, crimped wire, max. 4500 rpm, clamping with shank, brush diameter 50 mm, wire diameter 0.2 mm
Drill Set - spiral, diameter 1.6 mm, length 43 mm, working length 20 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
Drill Set - for metal and cast iron, conical shape, clamping system cylindrical shank, 10 pieces per pack
Drill Bit - conical shape, for metal, for plastic, with a diameter of 2mm and a length of 49mm, Cylindrical Drill Bit mounting, made of HSS-G,
Drill Set - 7 wood drills: diameter 3-10mm, working length: 30/40/45/50/60/65/70/75mm
3,090 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC701ac
Sanding Brush for drill - pot, for rust removal, for metal, crimped wire, max. 4500 rpm, mandrel clamping, brush diameter 60 mm, wire diameter 0.3 mm
Milling Cutter - grooving, Stalk, in the shape of a needle, for wood, material carbide, head diameter 3,2 mm, shank diameter 6 mm, total length 51 mm, working length 7,7 mm
Drill Set - spiral shape, for metal, for plastic, Circular shaft mounting, made of HSS ,
3,390 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC756v69
Sanding Brush for drill - end, to remove rust, on metal, crimped wire, clamping by means of a stopwatch, brush diameter 25 mm, wire diameter 0,3 mm
Drill Bit - conical shape, for wood, for metal, for tiling, for plastic, with a diameter of 10mm and a length of 120mm, Cylindrical Drill Bit mounting, made of Hard metal,
Drill Bit - conical shape, for metal, for plastic, with a diameter of 4,2mm and a length of 75mm, Cylindrical Drill Bit mounting,
3,490 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC756v67
Drill Bit - conical shape, for wood, for metal, for tiling, for plastic, with a diameter of 10mm and a length of 150mm, Cylindrical Drill Bit mounting, made of Hard metal,
Drill Bit - conical shape, for masonry, with a diameter of 12mm and a length of 200mm, Cylindrical Drill Bit mounting, made of Carbida,
Sanding Brush for drill - disc, to remove rust, cleaning, on metal and sheet metal, material brass, crimped wire, max. 4500 rpm, clamping with shank, brush diameter 75 mm, wire diameter 0.2 mm
Drill Bit - conical shape, for metal, for plastic, with a diameter of 5mm and a length of 86mm, Cylindrical Drill Bit mounting,
3,790 Ft
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC756v39
Drill Bit - conical shape, for wood, for tiling, for plastic, with a diameter of 6mm and a length of 250mm, Cylindrical Drill Bit mounting, made of Hard metal,
Drill Set - spiral, diameter 3.3 mm, length 65 mm, working length 36 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
Drill Bit - conical shape, for metal, for plastic, with a diameter of 3,5mm and a length of 70mm, Cylindrical Drill Bit mounting, made of HSS-G,
Sanding Brush - Potted, to remove rust, cleaning, on metal, material steel, braided wire, max. 4500 rpm, clamping with shank, brush diameter 65 mm, wire diameter 0.5 mm
Drill Set - spiral, diameter 3.2 mm, length 65 mm, working length 36 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
Chcete doručit do České republiky? Jdi na
Upínání s válcovou stopkou
Chcete doručiť tovar na Slovensko? Prezrite si
Upínanie s valcovou stopkou