D-c-fix Tira wood grey and beige, width 45 cm

The D-c-fix self-adhesive film will revitalise the look of your furniture. It's also suitable for window panes, storage boxes, binders, canisters, tiles, doors, door frames, or kitchen units. It is non-toxic, environmentally friendly, and lightfast. It contains no heavy metals and the adhesive used is solvent-free. It's also resistant to abrasion. You can apply it to any smooth, dry, and clean surface, as well as absorbent surfaces. The D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. You can adjust its size as needed using scissors or a utility knife.

Application:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, it's important to consider the direction of the pattern for wood-effect films. You can cut the film with scissors, or for more precision, use a utility knife with a metal straight edge. When applying to larger areas, it is advisable to moisten the surface with a water sprayer. This does not apply to mirror self-adhesive films, chalkboard films, metallic-effect wallpapers, and velour wallpapers. Water is ideal for window films and wood-effect films. Peel off about 10 cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push out any bubbles to the side. If the film wrinkles or becomes crooked, carefully peel it back, straighten it by stretching, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few to tens of minutes. After a few hours, the adhesive will bond firmly and correction will no longer be possible. When covering larger areas that require joining, an overlap of 5–10mm is recommended. Let the wallpaper overhang at the edges and trim it at the very end. When applying to edges, bends or folds, you can use a hot air gun, which will make the wallpaper more pliable, allowing it to bend and stretch. You need to work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.