D-c-fix tropical leaves, width 45 cm

D-c-fix self-adhesive film will breathe new life into your furniture. It's also suitable for window panes, storage boxes, files, jars, tiles, doors, frames and kitchen units. It is non-toxic, environmentally friendly and lightfast, making it safe for use in children's rooms. It contains no heavy metals and the adhesive used is solvent-free. It's also resistant to abrasion. You can stick it to any smooth, dry and clean surface, as well as absorbent surfaces. The D-c-fix film has an integrated self-adhesive layer, which makes application easy. Use scissors or a utility knife to trim it to the size you need.

Application:
Clean and degrease the surface. For window panes, clean with an alcohol-based cleaner and let dry. For furniture and laminate, wipe with a damp cloth. First, measure everything carefully dry, making sure to consider the direction of the pattern for wood-effect films. You can cut the film with scissors, or for more precision, trim it with a utility knife using a metal straightedge. When applying to large surfaces, it is advisable to moisten the area with a water sprayer. This does not apply to mirror, chalkboard, metallic-imitation or velour self-adhesive films. Water is ideal for window films and wood-effect films. Peel off about 10cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push any bubbles out to the side. If the film wrinkles or becomes crooked, carefully peel it back, straighten it by pulling it taut, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few minutes to tens of minutes. After a few hours, the adhesive will bond firmly and correction will no longer be possible. When covering large areas that require joins, an overlap of 5–10mm is recommended. Let the film overhang at the edges and trim it at the very end. When applying to edges, bends or folds, you can use a hot air gun, which will soften the film and allow it to bend and stretch. You must work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.