D-c-fix tropical leaves, width 67,5 cm

The D-c-fix self-adhesive film will breathe new life into your furniture. It's also suitable for window panes, storage boxes, binders, jars, tiles, doors, door frames, and kitchen units. It is non-toxic, environmentally friendly, and light-fast. It contains no heavy metals, and the adhesive used is solvent-free. It's also resistant to abrasion. You can stick it to any smooth, dry, and clean surface, including absorbent ones. The D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. You can cut it to the size you need with scissors or a utility knife.

Application:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, making sure to account for the direction of the pattern on wood-imitation films. You can cut the film with scissors, or for more precision, use a utility knife with a metal straight edge. When applying to larger areas, it's a good idea to moisten the surface with a water sprayer. This does not apply to mirror, chalkboard, metal-imitation, or velour self-adhesive films. Water is ideal for window films and wood-imitation films. Peel back about 10cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while continuously smoothing the film with a squeegee or sponge. Push out any bubbles to the side. If the film wrinkles or skews, carefully peel it back, stretch it to correct, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few to tens of minutes. After several hours, the adhesive will bond firmly, and corrections will no longer be possible. When covering larger areas that require joining, an overlap of 5–10mm is recommended. Let the film overhang at the edges and trim it at the very end. When sticking to edges, bends, or folds, you can use a hot air gun, which will soften the film and allow it to bend and stretch. You need to work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.