Entac light insect trap for socket 1,5 W
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 5
- Alternatives 5
- Accessories and suggested products
Entac light insect trap for socket 1,5 W
The 1.5 W Entac light insect trap is designed for indoor use and is powered directly from the mains by plugging into a socket. It works without connecting cables and is controlled by a switch on the bottom. It uses blue UVA light with a luminous flux of 100 lm to attract insects to the electric grid. The insect trap works on the light principle and does not contain any chemical substances or essences, so that no smoke or odour is produced during operation. The advantages are compact dimensions, low weight and the possibility to use it as supplementary lighting. The Entac insect trap is IP20 rated, so it is not protected against water ingress.
Key features of the Entac 1.5 W light insect trap
- Designed for indoor use
- Powered directly from the mains by plugging into a socket
- Works without connecting cables
- The switch on the bottom side is used for control
- Uses blue UVA light with a luminous flux of 100 lm to attract insects
- The light guides the insect to the electric grid
- The insect trap works on the light principle
- Contains no chemicals or essences
- No smoke or odour is produced during operation
- Advantages are compact dimensions, low weight and the possibility to use as supplementary lighting
- The Entac insect trap is IP20 rated, it is not protected against water ingress
Specifications
Type
Location
Features
Dimensions and weight
Packaging
Bramcke GmbH, An Gut Nazareth 18A, 52353 Düren, Spolková republika Německo, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
