HG Cement Residue Remover 1l
- Reviews 35
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 3
- Accessories and suggested products
HG Cement Residue Remover 1l
HG Cement Residue Remover (HG Product 12) removes thick cement coating and mortar residues from all types of porous and non-porous ceramic and stone paving and from natural stones that do not contain calcium salts, such as Norwegian slate, granite and quartz.
Key Features HG Cement Residue Remover Product, 1 l
- Cleaning agent for removing cement and mortar residues from ceramic and stone tiles
- Effectively dissolves thick cement coating
- Suitable for all types of porous and non-porous ceramic and stone tiles
- HG remover can be used on natural stones such as Norway slate, granite and quartz
Use:
Pour half a litre of the product into 5 litres of water. Before use, first soak the surface to be cleaned with clean water and then apply the solution with a cloth or mop. Afterwards, scrub the surface with a brush, leave it for a few minutes and scrub again. Remove the solution from the surface with a cloth and finally mop the floor with clean water. 1 litre of the product is sufficient for 15 - 35 m2 of surface.
Overview of hazardous substances:
- Hydrochloric acid
- Amidosulfuric acid
- Isotridecanol, ethoxylated
H314 causes severe skin and eye damage.
H315 is a skin irritant.
H318 causes serious eye damage.
H319 causes severe eye irritation.
H335 may cause respiratory irritation.
H412 Harmful to aquatic organisms with long-lasting effects.
Specifications
XXL pack
Type
Features
Usage
Chlorine content
HG International, B.V.; P.J. Oudweg 41, 1314 CJ Almere, Nizozemsko; [email protected], 036549480
Specifications can be changed without notice. Images are for illustrative purposes only.
