This page includes the most expensive drills BOSCH, or more specifically all products from the category drills BOSCH sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
696
Results
BOSCH Screwdriver bit Extra-Hard T25, 25 mm 2.607.002.497
Bit - size T25, for plasterboard, material S2
BOSCH Screwdriver bit Extra-Hard T15, 25 mm 2.607.002.495
Bit - torx TH, size T15, standard material S2
BOSCH Screwdriver bit Extra-Hard PH 2, 25 mm 2.607.001.513
Bit - cross PH, size PH2, standard material S2
BOSCH Drill Bit SDS plus-5x - 14x300x360mm
Drill Bit - conical shape, for masonry, with a diameter of 14mm and a length of 360mm, SDS Plus mounting, made of Steel,
BOSCH Cup Brush, crimped wire, 75, Stainless steel 2.608.622.102
Sanding Brush for angle grinder - bowl, to remove rust, on metal, material steel, crimped wire, max. 12500 rpm, clamping with M14 thread, brush diameter 75 mm, wire diameter 0,3 mm
BOSCH 27-piece Promoline set 2.607.017.331
Bit Set - multi-type, flat, cross-head PH, cross-head PZ and inbus, size PH1, PH2, PH3, PZ1, PZ2 and PZ3, includes adapter, manual screwdriver, ratchet and 27 bits, in plastic box
9,790 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC702b2
BOSCH 41-piece universal set 2.607.017.333
Drill Set - 15 pcs of drills (wood, metal, stone), 25 pcs of screwdriver bits, tool for hexagons
9,790 Ft
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC701a
BOSCH 5-piece set of spiral wood drills with hexagonal shank 2-6 mm 2.608.595.525
Drill Set - for wood, conical shape, hexagon clamping system, 5 pieces per pack
BOSCH Centring drill with fixing pin and rubber ring 11,5 × 84 × 136 mm F.00Y.145.203
Drill Bit - conical shape, for masonry, with a diameter of 11,5mm and a length of 136mm, made of Hard metal,
BOSCH Impact Control Screwdriver and Nut Extension Pack, 5 pieces 2.608.522.350
Bit Set - multi-type, cross-head PH and cross-head PZ, size PH2 and PZ2, material S2, includes 5 bits
BOSCH Drill set SDS-plus-5x, 4 bits, 5pcs 2.608.833.911
SDS-plus Drill Bit Set 5 pieces for hammers, Fittings, concrete, stone, 6-10mm, working length 100mm, overall length 160mm
BOSCH Wire brush disc, wire wavy, 115, Stainless steel 2.608.622.107
Sanding Brush - disc, to remove rust, cleaning, on metal, material steel, crimped wire, max. 8500 rpm, clamping with M14 thread, brush diameter 115 mm
BOSCH SDS plus-3 hammer drill 16 × 400 × 460 mm 2.608.831.047
Drill Bit - conical shape, for masonry, with a diameter of 16mm and a length of 460mm, SDS Plus mounting, made of Steel,
BOSCH Braided pot brush 75 mm, steel 1.608.622.029
Sanding Brush The pot wire brush provides a good rough surface finish. It features a braided wire for powerful steel cleaning. This brush is suitable for removing rough rust, protective coatings, paints and varnishes. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. It can be used with drills for 6 mm shank.
BOSCH Grinding plates without mounting set 2.608.601.175
Sanding Plate - for Bosch eccentric grinders, hard, disc diameter 125 mm
BOSCH Metal drill bits HSS-G, DIN 338 8,2 × 75 × 117 mm, 5 pcs 2.608.585.509
Drill Set - spiral, diameter 8,2 mm, length 117 mm, working length 75 mm, determination of metal, plastic and cast iron, clamping cylindrical shank, material HSS-G
BOSCH 9-piece HSS PointTeQ Hex 2-8 mm spiral drill set 2.607.002.826
Drill Set - for metal, conical shape, hexagonal clamping system, 9 pieces per pack
BOSCH Drill Bit HSS-GStand. line6x57/93mm 10 pcs pack
Drill Bit - conical shape, for metal, for plastic, with a diameter of 6mm and a length of 93mm, Cylindrical Drill Bit mounting, made of HSS-G,
BOSCH Drill Bit HSS-GStand. line8x75/117mm 5 pcs pack
Drill Bit - conical shape, for metal, for plastic, with a diameter of 8mm and a length of 117mm, Cylindrical Drill Bit mounting, made of HSS-G,
BOSCH Cup Brush, crimped wire, 65, Stainless steel 2.608.622.061
Sanding Brush for angle grinder - bowl, for cleaning, on metal, material steel, crimped wire, max. 12500 rpm, clamping with M14 thread, brush diameter 65 mm, wire diameter 0,3 mm
BOSCH Set of HSS-G spiral metal drill bits, DIN 338 2-6 mm, 5 pieces 2.608.595.517
Drill Set - for metal, plastic and cast iron, conical shape, hexagon clamping system, 5 pieces per pack
BOSCH HSS PointTeQ spiral drill bit 19,0 mm (tapered shank) 2.608.577.314
Drill Bit - conical shape, for metal, with a diameter of 19mm and a length of 198mm, Tapered shank mounting, made of HSS,
Chcete doručit do České republiky? Jdi na
Vrtačky
Chcete doručiť tovar na Slovensko? Prezrite si
Vŕtačky
Für den Versand nach Deutschland, besuchen Sie bitte
Bohrmaschinen
Für den Versand nach Österreich, besuchen Sie bitte
Bohrmaschinen