This page includes the most expensive hand Sanders Bosch, or more specifically all products from the category hand Sanders Bosch sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
391
Results
BOSCH Support plate 2.608.601.169
Backing Pad - for Bosch PEX 270 A and PEX 270 AE eccentric grinders, medium hard, diameter 125 mm, 8 holes, screws included, hexagon wrench and Allen wrench
BOSCH Wire brush disc, wire wavy, 115, Stainless steel 2.608.622.107
Sanding Brush - disc, to remove rust, cleaning, on metal, material steel, crimped wire, max. 8500 rpm, clamping with M14 thread, brush diameter 115 mm
BOSCH Hard grinding plates 2.608.601.061
Sanding Plate - for Bosch eccentric grinders, hard, disc diameter 125 mm
BOSCH Pot grinding wheel - stone/concrete 90 mm 110 mm 55 mm 54 1.608.600.241
Cup Grinding Wheel - diameter 110 mm, grit 60, thickness 55 mm, maximum speed 8500 rpm
BOSCH Pot grinding wheel - stone/concrete 30 1.608.600.240
Cup Grinding Wheel - diameter 110 mm, grit 30, thickness 55 mm, maximum speed 8500 rpm
BOSCH Grinding plates medium 2.608.601.062
Sanding Plate - for Bosch eccentric grinders, medium hard, disc diameter 125 mm
BOSCH Pot grinding wheel - stone/concrete 24 1.608.600.239
Cup Grinding Wheel - diameter 110 mm, grit 24, thickness 55 mm, maximum speed 8500 rpm
BOSCH Sandpaper C470, pack of 50, 93 × 186 mm, 240 2.608.607.974
Sandpaper - rectangle, suitable for vibrating sanders, grain: 240
BOSCH Cup Brush, crimped wire, 65, Stainless steel 2.608.622.061
Sanding Brush for angle grinder - bowl, for cleaning, on metal, material steel, crimped wire, max. 12500 rpm, clamping with M14 thread, brush diameter 65 mm, wire diameter 0,3 mm
BOSCH Universal 230x22.23x2.6x7mm
Diamond Disc - cutting, suitable for concrete and brick, segmented, diameter 230 mm, installation hole 22.23 mm, thickness 2.6 mm, maximum speed 6650 rev/min
7,790 Ft
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC10a5
BOSCH Universal Turbo 180x22.23x2.6x7mm
Diamond Disc - cutting, suitable for concrete and brick, cutting type turbo, diameter 180 mm, installation hole 22.23 mm, thickness 2.6 mm, maximum speed 8500 rev/min
BOSCH Standard for Stone 125x22.23x1.6x10mm
Diamond Disc - cutting, suitable for concrete and brick, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 1.6 mm, maximum speed 12250 rev/min
BOSCH Diamond cutting wheel Standard for Universal 125x22mm 2.608.615.059
Diamond Disc - cutting, suitable for concrete, brick, masonry, tiles and tiles, diameter 125 mm, installation hole 22.23 mm, maximum speed 8500 rev/min
7,730 Ft
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ZDnar2276
BOSCH X-LOCK Disc wire brush, braided 2.608.620.731
Sanding Brush - wire, O 115, steel 115mm, 0.5mm, 12mm
BOSCH C450 standard for universal use, G 40, pack of 50, 150 mm, 6 holes 2.608.621.721
Sandpaper - ring, suitable for eccentric sanders, diameter: 150mm, grain: 40
BOSCH C450 standard for universal use, G 40, pack of 50, 150 mm, 15 holes 2.608.621.730
Sandpaper - ring, suitable for eccentric sanders, diameter: 150mm, grain: 40
BOSCH Soft grinding plates 2.608.601.063
Sanding Plate - for Bosch eccentric grinders, soft, disc diameter 125 mm
BOSCH Support plate 115 mm M14 hard 2.608.601.783
Backing Pad - for angle grinders, Tough, diameter 115 mm, flange thread M14, extremely rigid construction with grooves, material thermostable plastic
BOSCH X-LOCK System support plate 115 mm thick 2.608.601.713
Backing Pad - for angle grinders compatible with the X-LOCK system, rough, diameter 115 mm, material thermostable plastic
BOSCH Braided pot brush 75 mm, steel 2.608.622.099
Sanding Brush for angle grinder - pot, to remove rust, cleaning, on metal and sheet metal, material steel, braided wire, max. 12500 rpm, clamping with M14 thread, brush diameter 75 mm, wire diameter 0,35 mm
BOSCH Soft sanding pads, 115 mm 2.608.601.066
Sanding Plate - for Bosch eccentric grinders, soft, disc diameter 115 mm
BOSCH Bevel brush, crimped wire, 100, Stainless steel 2.608.622.108
Sanding Brush for angle grinder - disc, to remove rust, cleaning, on metal and sheet metal, material steel, crimped wire, max. 12500 rpm, chamfered, clamping with M14 thread, brush diameter 100 mm
Chcete doručit do České republiky? Jdi na
Ruční brusky
Chcete doručiť tovar na Slovensko? Prezrite si
Ručné brúsky
Für den Versand nach Deutschland, besuchen Sie bitte
Handschleifer
Für den Versand nach Österreich, besuchen Sie bitte
Handschleifer