HG protective film for laminate and vinyl with gloss 1000 ml
- Reviews 2
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 2
- Accessories and suggested products
HG protective film for laminate and vinyl with gloss 1000 ml
HG protective film for laminate and vinyl with gloss is a liquid polymer emulsion that is easy to apply and after drying forms a glossy and thin but very strong protective film protecting the surface of laminate floors from wear, scratches and other damage. Gloss and protection for floors in one, it can also cover existing wear marks and even has an anti-slip effect.
Key Features HG protective film for laminate and vinyl with gloss, 1000 ml
- Very easy to use product
- Extremely thin but strong protective layer for your laminate floors
- Protects against wear, scratches and other damage
- Covers dull spots and existing damage
- Anti-slip effect
- Gives a glossy look to the floor
Use:
Shake before use. Pour a small amount of undiluted product on the floor and apply it evenly in a thin layer in one direction on the floor using a floor polisher. You can also use a clean, lint-free cloth wrapped around the squeegee. Allow to dry (about 60 minutes). You can walk on the floor for about 1 to 2 hours after the final treatment, and full curing occurs after 3 days. Once dry, you can apply a second coat across the first coat. 1 litre is sufficient for approximately 60 m² per coat.
Warning:
Use the product only on floors with fully bonded joints. May produce an allergic reaction.
Storage:
Protect from frost. Keep out of reach of children.
Specifications
XXL pack
Surface type
Type
Functions
Specifications
volume
Usage
Chlorine content
HG International, B.V.; P.J. Oudweg 41, 1314 CJ Almere, Nizozemsko; [email protected], 036549480
Specifications can be changed without notice. Images are for illustrative purposes only.
