Olympia A3 4-in-1 Set

Laminate A3 or smaller documents

The Olympia A3 4in1 set is ready to laminate quickly, as it heats up in approximately 2 minutes. The machine can laminate A3 or smaller documents (330mm entry width) and uses pouches from 75 to 125 microns thick at a speed of 400mm/min. Using the device is very simple – just plug the laminator in, turn it on with the switch on the right side, and wait for the Olympia A3 4in1 set to indicate it's ready by lighting up the green READY indicator. Then, simply insert the laminating pouch with the document into the entry slot. The Olympia A3 4in1 set automatically pulls it in, and the laminated document emerges from the other side.

The Olympia A3 4in1 set offers useful features

With the Olympia A3 4in1 set, you can also perform cold lamination, which you activate with the switch on the right side of the machine (move it to the COLD position). To ensure smooth and safe operation, the Olympia laminator has overheating protection. If the maximum temperature is exceeded, the device automatically shuts down. The high-quality heating system prevents bubbles from forming during lamination. If a pouch happens to get stuck (if inserted crookedly or if a crumpled pouch is used), you can use the Jam Release function. This releases the jammed pouch, allowing you to easily pull it out of the machine. The Olympia A3 4in1 set package also includes 18 laminating pouches with a thickness of 80 microns (3× A3, 3× A4, 3× A5, 3× A6, 6× 95×60mm – business card). This means you can try out the laminator right after unpacking.

The Olympia A3 4in1 set has an integrated trimmer

The Olympia A3 4in1 set includes a multi-function cutting head. The trimmer can cut up to 3 sheets of standard 80g/m2 paper at once. Just insert the paper under the pressure bar of the Olympia A3 4in1 set and you're ready to cut. The transparent bar holds the paper you're cutting securely in place. The ruler range is 0–30.5cm / 0–12". The cutting surface features several guides to ensure a more precise cut:

• Ruler — perpendicular to the cut, on both sides of the cutting surface with a scale in centimetres (1mm resolution, 0–4.5cm range)
• Protractor — with a scale in 15° increments
• Grid — 1×1cm squares across the entire cutting surface

Corner rounder in the Olympia laminator's compartment

Tired of sharp corners on your paper and the occasional dog-ear? In the Olympia A3 4in1 set, you'll find a special compartment with a corner rounder, positioned so that it can't fall out. It's as easy to use as you'd expect — just insert the corner of the paper and press. Your paper gets a neat, rounded corner, and the leftover scrap falls into a tray on the underside of the rounder. When you're finished rounding corners, you can simply store it back in the compartment of the Olympia A3 4in1 set.