Solight PIR Sensor for an E27 Bulb
Solight PIR Sensor for an E27 Bulb
The Solight motion sensor automatically switches on indoor lighting when it detects human movement. It fits directly into a standard E27 screw-in bulb holder. The integrated PIR sensor registers infrared radiation in the entire surrounding area. The detection angle is a full 360° to reliably capture movement from all directions. The device operates on a standard mains voltage of 220–240V/AC at a frequency of 50–60Hz and helps reduce electricity consumption by only lighting up when people are present.
Key features of the Solight PIR sensor for E27 base bulbs
- Motion detector for automatically switching on indoor lighting
- Installs by screwing directly into the existing E27 socket of your light fitting
- PIR sensor with a 360° detection angle
- Detection distance of 6m at an ambient temperature of up to 24°C
- Adjustable lighting time from 10 seconds to 7 minutes
- Adjustable light sensitivity from 10 to 2000 LUX
Simple installation into your light fitting
Installing the device into your existing lighting doesn't require any complex technical modifications to your home's electrical wiring. You simply screw this sensor into a ready E27 socket and then insert your chosen bulb with the same screw thread. Installation cuts preparation time to a minimum and doesn't require a professional electrician. The entire connection process is completed without any special tools.
Full-range detection field
The sensor monitors the designated space in a circular pattern directly below it. The detection distance for reliable motion capture is 6m at an ambient air temperature of up to 24°C. The sensor covers a full 360° circle, effectively preventing blind spots in the monitored room. The detector reacts to the heat of moving people and switches on the connected light, regardless of which direction a person enters the defined space from.
Sensitivity and time settings
You can very easily customise the behaviour of the entire system according to the specific lighting conditions in the room. The time delay for switching off the light after people leave ranges from 10 seconds to 7 minutes. You can adjust the light sensitivity in the range of 10 to 2000 LUX using the rotary controls on the device body. This means the connected light fitting only switches on at dusk or in complete darkness, saving electricity during a bright day.
Light source compatibility
You can place various types of light sources with a standard E27 screw thread into the internal socket of this device. The rated load in this case is 60W. The design is compatible with both classic and LED bulbs with the same base, so you don't need to buy special light sources. The device works reliably with modern energy-saving LED bulbs as well as with traditional halogen sources that do not exceed the specified power limit.
Indoor use and technical parameters
The device has an IP20 rating, which is suitable for dry indoor spaces in homes or offices. The recommended mounting height is between 2m and 3.5m above floor level. The white finish of the plastic body blends in easily with most common ceilings and walls. The total weight of the device is only 0.1kg, making it easy to handle during installation in a light fitting.
Designed for:
Bulbs with an E27 base
Use:
Indoors
Power supply:
220-240V/AC, 50-60Hz
Detection angle:
360°
Detection distance:
6m (up to 24°C)
Rated load:
Max. 60W (E27)
Lighting time setting:
10 sec–7 min
Light sensitivity setting:
10–2000 LUX
Ingress protection:
IP20
Specifications
Use
Connectivity
Type
Functions and features
Notification
Material
Operating environment
Location
Input voltage
Dimensions and weight
Motion detection
Use
Solight Holding s.r.o., Na Brně 1972, 500 06 Hradec Králové, +420 491 512 010, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
