Jurek Atak 2.5 Duo
Jurek Atak 2.5 Duo
The Jurek ATAK 2.5 DUO tent is a two-door, double-skinned "dome" tent with a rectangular floor plan suitable for all types of hiking up to moderately demanding conditions and for more frequent use. The inner tent is firmly connected to the floor. It is suspended from the members of the structure by tension cords and hooks. The top of the inner tent has ventilation holes covered with fine mesh. In the entrances of the inner tent there are mosquito nets made of fine mesh for more intensive ventilation and to protect against unpleasant insects.
3
Number of persons
5000 mm / 10000 mm
Water column tropico / flooring
110 × 160 × 340 cm
Tent dimensions (h × w × d)
Double-walled
Number of jackets
3 kg
Weight
Key features of the Jurek ATAK 2.5 DUO tent
- Tent for 3 persons
- Small apses in front of the entrances suitable for putting things away outside the inner tent
- Proven indoor ventilation
- Hanging the interior with cords and hooks makes construction easier and faster
- Fine mesh mosquito netting for increased ventilation
- There are ventilation holes in the top of the inner tent
- Anchoring is done by handles on the edges
Comfortable stay on the go
The outer tent (tropico) is pulled over the structure and at the bottom it is attached by the ends of the poles. In front of the entrances of the inner tent, the tropico is stretched to form small apses that allow for the storage of dirty things (not intended for cooking). The anchoring is done by the handles on the edges and in the centres of the longer sides of the tropic. There are two ventilation "dormers" at the top on the longer sides. There is a gap of about 5-6 cm between the inner and outer tent walls, which improves thermal comfort, ventilation and reduces dew. The gap can be adjusted as required by loosening or tightening the tensioning cords of the inner tent.
Additional information
- Underlay - Polyester fabric with PU impermeable coatings and silicone treatment
- Tropiko - Polyester RIPSTOP fabric with polyurethane (PU) impermeable coatings and silicone treatment
- Inner tent - Polyester breathable RIPSTOP fabric with hydrophobic treatment
- Pins - Duralloy needles diameter 6 mm
- Snap fasteners - Spiral zippers
- Construction - Duralumin 7075-T9
- Connection of members - Bundle of elastic threads wrapped with polyamide sheath (inside the structure)
Accessories
- 1× indoor tent and tropico
- 10× tent peg
- 2× long duralumin rod l. 8.5mm
- 6× anchor line long (2 m)
- 4× anchor line short (1 m)
- 1× cover for tent, structure and stakes
- 1× repair kit (self-adhesive patch and 12cm dural pipe)
Water column
Indicates the resistance of the fabric and seams to water leakage. Indicates the amount of water that the material is able to hold before it begins to leak. The higher the value in mm, the higher the resistance of the tent. Each tent should have a tropical canopy with a water column of at least 2,000 mm, which is approximately the pressure exerted by a raindrop flying at 80-90 km/h. If you want to weather the storm unscathed, a water column of at least 3,000 mm is a better bet. A water column of 5,000 mm is recommended for normal hiking. For more demanding conditions, choose a subfloor with a water column of 8,000-10,000 mm.Specifications
Type
Tent pitching
Features
Unpacked dimensions
Packed dimensions
Accessories
JUREK S+R s.r.o., Kunčice pod Ondřejníkem č.p. 766, 73913 Czech Republic, +420 556 850 032, [email protected], www.jurek.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
