SHARKS Welding inverter MMA/TIG 150 HF

Welding is not an easy task and doing a really good job requires some practice and training. However, if you have quality equipment, everything will be much easier. The Sharks Welding Inverter is primarily designed for conventional MMA welding and also the TIG welding method, for tungsten electrode welding in a protective atmosphere of inert gas. Its performance can be controlled continuously in the range of 20-150A. With this tool, you will be working with the latest technology. With its practical handle and light-weight, you will be able to carry it wherever you need it. 

Key features

• High-quality inverter
• MMA and TIG welding
• Average MMA electrode up to 5mm
• Tungsten electrode diameter up to 1.6mm
• Actual output current 160A
• No-load Voltage 70V

Technology that makes things easy

This inverter is a reliable tool, which features a lot of modern technology. From the very beginning, it is necessary to mention the HF function, which allows high-frequency ignition of the arc without contacting the welding electrode (for the TIG method). Arc Force ensures the stability of the arc by means of current regulation, to create an ideal level for welding. The Soft and Hot Start functions simply allow the welder to start up more slowly and make it easier to ignite the arc. If you need a good welding machine, there's no need to look any further. At a reasonable price, you will get a professional tool with all the accessories you need to do a great job.

Accessories:

Ground clip
Electrode holder
TIG burner
Welding mask
Brush/hammer

Technical parameters:

Power supply:
230V/50Hz

No-load voltage:
70V

Range of welding current:
20-150A

Efficiency:
90%

TIG loader:
50% = 200A, 100% = 141A

MMA loader:
50% = 160A, 100% = 113A

Working cycle at 30°C:
100%

Insulation class:
H

Usable electrodes:
MIG 1.6mm; MMA 5.0mm (not included)

Weight:
7.5kg

Dimensions:
500 × 270 × 370mm