Wynn's 28679 Turbo Cleaner, 200 ml

Don't like the alternatives? Choose from the full product list
Wynn's 28679 Turbo Cleaner, 200 ml
Use:
Key FeaturesWynn's 28679 Turbo Cleaner, 200 ml
- Cleans and unblocks dirty turbocharger geometry, with or without disassembly
- Dissolves deposits (rubber, varnish, tar, carbon) and soot
- Restores turbocharger power to its original level
- Restores the optimum air/fuel ratio
- Does not harm exhaust aftertreatment systems
Instructions
Cleaning the turbo without disassembly
- Start the engine and let it warm up
- Remove the flexible hose in the air intake system that is located between the air filter and the turbocharger/intercooler
- Keep petrol engines running at up to 2,000 rpm, keep diesel engines idling, NEVER add throttle
- Spray Turbo Cleaner into the air intake manifold while the engine is running
- Spray Turbo Cleaner at short intervals to prevent the engine from revving up and knocking
- Wait for the engine speed to drop to the original level after each spray
- If necessary, add gas to petrol engines to prevent engine stalling, NEVER add gas to diesel engines
- Carry out the treatment until the entire content of the product (200 ml) is consumed
- Let the engine idle for a few minutes, stop the engine
- Reconnect the air intake hose
- Start the engine, accelerate about 5 to 10 times (do not exceed 3000 rpm) or drive the vehicle 5 to 10 km (do not exceed 3000 rpm)
- Finally, let the engine idle for at least one minute before switching it off
Specifications
Volume
Usage
Season
Type
Features
Specifications can be changed without notice. Images are for illustrative purposes only.

