FESTA Circular saw AKU SHARE20V 165mm/d 16mm 28035 (without AKU)
Don't like the alternatives? Choose from the full product list
FESTA Circular saw AKU SHARE20V 165mm/d 16mm 28035 (without AKU)
The FESTA 28035 Cordless Circular Saw finds a wide range of uses in the workshop, garage or garden. It can be used to cut wood and wood-based materials, or other materials (with the appropriate blade). It is suitable for roofing, construction and finishing work such as preparation and cutting of roof battens, boards, floor panels etc. The machine is powered by a powerful motor that develops up to 3,650 rpm, so it can handle even hard materials (depending on the blade used). The ergonomically shaped handles (main and front) allow a comfortable two-handed grip and there are safety features such as the self-closing blade cover or the release button for the switch. All controls are easily accessible for right and left-handed users. You will also appreciate the suction adapter that allows you to connect the machine to an external dust extractor. One FESTA SHARE 20 V battery (not included) is used to power the circular saw.
Key features of the AKU Circular Saw FESTA 28035 (without AKU)
- The FESTA Circular Saw is designed to cut wood or other materials (with the corresponding blade)
- The 165 mm diameter saw blade can handle straight cuts up to 50 mm deep
- Possibility of precise adjustment of cutting depth
- With the parallel stop, precise and straight cuts can be made around the edges
- Self-closing blade cover protects the operator during work
- The FESTA 28035 can also handle mitre cuts at an angle of 0 - 45°
- Two ergonomic handles allow comfortable two-handed guidance
- Easy connection of the dust extractor using the dust extractor adapter
- The saw is powered by one FESTA SHARE 20 V battery
The FESTA 28035 can handle straight and mitre cuts
The FESTA Circular Saw has a robust aluminium base with a stop bar that allows comfortable straight cuts. The cutting depth can be easily adjusted with a screw and scale up to 50 mm. By loosening the wing nut, you can also adjust the saw's angle of inclination from 0 - 45°, allowing you to make precise slanted cuts with a maximum depth of 35 mm. There is also an adjustable parallel stop (side guide), which allows you to make precise and straight cuts along the edges of the workpiece.
High cutting performance is ensured by the FESTA SHARE 20 V battery
The FESTA 28035 is powered by a Li-ion battery (2 or 4 Ah) of the FESTA SHARE 20 V series, which does not self-discharge and has no memory effect, so it can be recharged repeatedly without risk of capacity loss. For normal cutting, the 2 Ah (28080) battery is sufficient and can be charged in approximately 40 minutes. The 4 Ah battery (28081), which takes approx. 90 minutes to charge, is then suitable for more demanding and longer-term applications. In addition, you can use the same battery to power all machines and equipment in the FESTA SHARE 20 V battery range.
Specifications
Battery
Usage
Type
Features
Disc
Levior s.r.o., Tovačovská 3488/28, 750 02 Přerov, Česká republika, [email protected], www.levior.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
